R: Morrow Designs Micro-Menu system - Rev 2.3
R: Module - INIT.PIL
R: Copyright 1982, 1983 Morrow Designs, Inc.
R: All Rights Reserved
R: Written by Harrison Schreppel for Morrow Designs
R: Modified by Steve Tai and John VanderWood for NewWord 12/9/83
R:
CLRS:
LF:2
T:{
T:Congratulations!}
T:You have successfully installed CP/M for your Micro Decision.   But you are
T:not done yet.  Before you can use any of the application programs provided, 
T:(such as NewWord or Logicalc),  you need  to create working diskettes which
T:contain these programs.    This {must} be done by using the {Create Working 
T:Diskettes}option on your Micro Menus.
T:
T:When you are ready to create  working diskettes,  press{[RETURN]} to go to
T:the Create Working Diskettes menu.
LF:1
T:{*************************************************************************
T: *                                                                       *
T: *                               WARNING!                                *
T: *                                                                       *
T: *       Attempting to use the supplied application programs without     *
T: *       creating working diskettes will cause improper operation of     *
T: *       of these programs.                                              *
T: *                                                                       *
T: *************************************************************************}
INMAX:1
*LOOP
CUR:0,22
TNR: Press{[RETURN]}to continue.
A:
M: ,
tn:      
Jn:*LOOP
CLRS:
T:      Before  creating your Working Diskette,  the Micro Decision needs 
T:      to know a few things about your printer.
T:
T:      There are two types of printers, parallel and serial.
T:
T:         {Your  system  is currently  set up for  a  parallel  or 
T:          centronics-type  printer.   If you are using a parallel 
T:          printer,  press}C{to proceed with creating your Working 
T:          Diskettes.} 
T: 
T:      If you are using a{serial}printer,  the Micro Decision will  need 
T:      to know its baud rate and type of handshaking. If you do not have 
T:      a  printer or you do not know this information,  you can postpone 
T:      entering this information now by pressing{C}. You will still need 
T:      to  run  the program{SETUP}before you  can  print  anything.  See 
T:      Appendix D of the Micro Decision User's Guide for instructions.
T:
T:      If you know your printer baud rate and handshaking type,  you can 
T:      run{SETUP}right now and get that out of the way.
T:
T:
*again
CUR:0,22
TNR:      Press{S}to run SETUP or{C}to Create Working Diskettes.  
A:
M: S , C
tnr:      
jn:*again
m:S
jn:*next
TNR:{
CPM:SETUP|
*next
CLRS:
LF:10
T:{Please stand by...
CH:CPMENU
END: