Çi  1$ÿP\ÿD”ÿ4ÌÿWÿR <ÿS!tÿA"¬ÿQ#í÷ FILEATTR Configuration Attribute Options (00 = don't change 7F = set to OFF 80 = set to ON): 1. F1 attribute.............XX P. Public attribute.........XX D. No Date attribute........XX 4. F4 attribute.............XX W. Wheel Protect attribute..XX R. Read Only attribute......XX S. System attribute.........XX A. Archive attribute........XX Toggle: Q. Operate quietly..........XXX YESNO € FILEATTR Configuration Help Though not necessary under normal use, the default settings of all FILEATTR options may be configured. Normally no options are active unless specified on the command line. If desired, one or more options can be made active by default. ATTRIBUTE OPTIONS - As distributed, all of FILEATTR's attribute option defaults are 00, meaning that FILEATTR will not change any file attribute unless explicitly commanded to do so. To configure FILEATTR to turn a file attribute OFF by default, change the corresponding setting to 7F hex. To configure FILEATTR to turn a file attribute ON by default, change the corresponding setting to 80 hex. For example, to make FILEATTR set specified files to Public by default, change the "Public attribute" setting to 80. Now FILEATTR will set specified files to Public unless the /NP option is used, causing FILEATTR to set specified files to Private. However, since there is no command which tells FILEATTR NOT to change an attribute, the program will now insist on turning the Public attribute either on (default) or off (through the /NP option). FILEATTR Configuration Help TOGGLE - Change this setting to YES to make FILEATTR always operate quietly (the /Q option will no longer have any effect).