;    FILE APUTST.SRC      VER.1.0
;    CREATED 9-16-80
;    LAST UPDATE 9-25-80  WRITTEN BY D.A. STEELE

;    THIS PROCEDURE WILL DO A FEW TESTS TO ASSURE THAT THE APU
;    IS FUNCTIONING.  THE TESTS ARE NOT CONCLUSIVE HOWEVER
;    AND THE USER SHOULD NOT ASSUME THAT ALL OPERATIONS OF THE
;    APU HAVE BEEN CHECKED.

;    THIS MODULE SHOULD BE DECLARED EXTERNAL IN THE PASCAL
;    MONITOR PROGRAM
;
;    FUNCTION APUT : INTEGER; EXTERNAL

;    THIS MODULE WILL RETURN TRUE OF FALSE DEPENDING WHETHER
;    OR NOT THE TEST PASSED OR FAILED.  TRUE = FAILED.


          NAME APUT
          ENTRY APUT


APUDAT:   EQU       0AAH
APUSTAT:  EQU       0ABH
SADD:     EQU       6CH
SSUB:     EQU       6DH  ;SUBTRACT TOS FROM NOS
SMUL:     EQU       6EH  ;I6 BIT MULTIPLY
SMUU:     EQU       76H  ;16 BIT MILTIPLY
SDIV:     EQU       6FH  ;16 BIT DIVIDE    
DADD:     EQU       2CH  ;23 BIT ADD
DSUB:     EQU       2DH  ;32 BIT SUBTRACT
DMUL:     EQU       2EH  ;32 BIT MULTIPLY LOWER
DDIV:     EQU       2FH  ;32 BIT DIVIDE
FADD:     EQU       10H  ;32 BIT FLOATING ADD
FSUB:     EQU       11H  ;32 BIT FLOATING SUBTRACT
FMUL:     EQU       12H  ;32 BIT FLOATINNG MULTIPLY
FDIV:     EQU       13H  ;32 BIT FLOATING DIVIDE
SQRT:     EQU       1    ;SQUARE ROOT
PWR:      EQU       0BH  ;RAISE TO A POWER
FIXD:     EQU       1EH  ;FLOAT => FIX
FLTD:     EQU       1CH  ;FIX => FLOAT
CHSD      EQU       34H  ;FIXED SIGN CHANGE
CHSF      EQU       15H  ;FLOAT SIGN CHANGE
XCHD      EQU       26H  ;EXCHANGE TOS W/ NOS

ATEST1:   EQU       1    ;APU BUS ERROR TEST
ATEST2:   EQU       2    ;APU STACK TEST
ATEST3:   EQU       4    ;DADD TEST
ATEST4:   EQU       8    ;DSUB TEST
ATEST5:   EQU       10H  ;DMUL & DDIV TEST
ATEST6:   EQU       20H  ;UNUSED
ATEST7:   EQU       40H  ;16 BIT ARITHMATIC TEST
ATEST8    EQU       80H  ;MISC TEST

APUSTOR:  DS        16   ;STORAGE AREA FOR RESULTS
�APUERR:   DS        2    ;THE MODULE ARROR FLAG
ATEST:    DS        1    ;THE TEST BEING DONE
STATUS:   DS        1    ;STORAGE FOR THE STATUS BYTE


;========================================================
;THIS ROUTINE WILL SEND THE COMMAND IN A TO THE APU
;AND THEN MONITOR THE STATUS BYTE UNTIL IT GOES NOT
;BUSY OR UNTIL 64K MACHINE CYCLES HAVE PASSED
;IF A NOT BUSY IS NOT RECEIVED THEN THE ERROR FLAG IS SET TO
;ALL ONES
;
OUTIT:    PUSH      B
          OUT       APUSTAT   ;OUTPUT THE COMMAND
          LXI       B,0FFFFH  ;SET THE TIMER
OUTIT1:   DCX       B
          IN        APUSTAT   ;GET THE STATUS BIT
          ANI       80H       ;SEE IF THE BUSY BIT IS 1
          JNZ       OUTXIT
          
          MOV       A,B       ;START CHECKING THE B REGISTER
          ORA       C         ;DON'T FORGET THE BOTTOM HALF
          CPI       0         
          JNZ       OUTIT1    ;IF ISN'T 0 THEN GO ANOTHER ROUND
          LXI       H,APUERR+1;IF IT IS ZERRO THEN THE APU IS BAD
          MVI       M,2       ;SET THE ERROR FLAG 

OUTXIT:   POP       B
          RET                 ;AND RETURN

;=============================================================
;ERROR ROUTIME TO OR IN THE NEW ERROR
ERROR:    PUSH      B
          LDA       APUERR    ;GET THE ERROR FLAG
          MOV       B,A
          LDA       ATEST     ;GET TEST TYPE
          ORA       B
          STA       APUERR    ;STORE THE ERROR FLAG
          POP       B
          RET     
;===========================================================
;    THIS IS A COMPARE ROUTINE TO CPMPARE A STRING OF BITS
;    THE LENGTH OF WHICH IS IN BC AND IS POINTED TO BY HL
;    WITH ANOTHER STRING POINTED TO BY DE.

COMPX:
COMPX1:   MOV       A,M       ;GET ONE OF THE FIRST BYTES
          XCHG
          CCI                 ;COMPAIR A WITH MEMORY. INX HL
                              ;AND DCX BC.
          CNZ       ERROR     ;IF THE BYTES ARE NOT EQUAL ERROR
          XCHG
          INX       H         ;INCREMENT THE OTHER POINTER
          MOV       A,B       ;IS IT THE END OF THE STRING
          ORA       C
�          NOP                 ;MAINTAIN CODE SIZE         
          JNZ       COMPX1    ;IF NOT END DO IT AGAIN
          RET

;===========================================================
;THIS WILL TEST THE BUS LINES TO THE APU

REGTST:   MVI       C,APUDAT       ;PUT PORT NUMBER IN C FOR MOVE
          MVI       B,16           ;GOING TO MOVE 16 BYTES
APU1:     OUTP      D              ;OUTPUT THE PATTERN 16 TIMES
          DCR       B              ;COUNT THE OUTPUTS
          JNZ       APU1

          ; NOW READ THE 16 BYTES BACK
          MVI       B,16           ;THERE'S 16 OF THEM
APU11:    INP       A              ;GET THE TOS
          CMP       D              ;IT SHOULD NOT HAVE CHANGED
          CNZ       ERROR          ;IF IT HAS CHANGED THEN ERROR
          DCR       B
          JNZ       APU11
          RET                      ;END OF BUS TEST
          

APUT1:  MVI       D,01010101B    ;FILL D WITH A PATTERN
          CALL      REGTST
          MVI       D,10101010B    
          CALL      REGTST         ;DI FINAL BUS TEST
          RET


;===========================================================
;    NEXT IS A TST OF ALL APU REGISTERS. ALL 256 BIT PATTERNS
;    WILL BE TESTED IN EACH REGISTER

APUT2:    MVI       D,0

APUT21: CALL      REGTST
          OUTP      D         ;SLIDE THE APU REGISTER WINDOW
          INR       D         ;GET THE NEXT BIT PATTERN
          JNZ       APUT21  ;IF WE HAVN'T DONE THEM ALL THEN CONTINUE
          RET

;===========================================================
;    THE NEXT TEST WILL TEST THE DOUBBLE ADD INSTRUCTION OF 
;    THE APU

RES:      DB        0,0FFH,0FFH,0FFH
APUT3:  MVI       C,APUDAT
APUT31: MVI       D,55H     ;OUTPUT THE FIRST OPERAND
          OUTP      D
          OUTP      D
          OUTP      D
          MVI       D,0
          OUTP      D

�          MVI       D,0AAH     ;OUTPUT THE SECOND OPERAND
          OUTP      D
          OUTP      D
          OUTP      D
          MVI       D,0
          OUTP      D

          MVI       A,DADD
          CALL      OUTIT     ;OUTPUT THE OPCODE

          MVI       C,APUDAT  ;TIME TO GET THE RESULT
          LXI       H,APUSTOR ;STRING TO PUT IT IN
          MVI       B,4       ;THE LENGTH
          INIR                ;MOVE IT IN

          LXI       B,4       ;COMPAIR THE RESULTS
          LXI       H,RES
          LXI       D,APUSTOR
          CALL      COMPX
          RET

;============================================================
;    THIS WILL TEST DADD AND DSUB BY TAKING A NUMBER-ADDING A
;    SECOND NUMBER TO IT AND THEN SUBTRACTING THE FIRST NUMBER
;    FROM THE SECOND.  THE RESULT SHOULD BE THE SECOND NUMBER
;
NUM1      DB   0,0AAH,55H,0AAH
NUM2      DB   1,55H,0AAH,55H

APUT4:  MVI       C,APUDAT  ;DATAPORT IN C
          MVI       B,8       ;MOVING 8 BYTES
          LXI       H,NUM2+3  ;START W/ LSB
          OUTDR               ;LOAD THE APU

          MVI       A,DADD
          CALL      OUTIT     ;ADD THE TWO NUMBERS

          MVI       B,4       ;MOVING 4 BYTES
          LXI       H,NUM2-1  ;START W/ LSB
          OUTDR               ;LOAD APU WITH FORST NUMBER AGAIN

          MVI       A,DSUB
          CALL      OUTIT     ;SUBTRACT THE FIRST FROM THE SECOND

          LXI       H,APUSTOR
          MVI       B,4
          INIR                ;GET THE 4 BYTE RESULT

          LXI       H,APUSTOR
          LXI       D,NUM2
          LXI       B,4       ;COMPAIR 4 BYTES
          CALL      COMPX
          RET

;============================================================
�;    THIS TEST WILL TEST MULTIPLY AND DIVIDE BY TAKING A NUMBER
;    AND MULTIPLYING IT BY A SECOND NUMBER AND THEN DIVIDING
;    THE RESULT BY THE FIRST NUMBER.  THE FINAL RESULT SHOULD
;    BE THE SECOND NUMBER.


NUMA:     DB   0,0,5,3
NUMB:     DB   0,0,1,2
APUT5:

          MVI       C,APUDAT
          MVI       B,8
          LXI       H,NUMB+3
          OUTDR               ;LOAD THE APU

          MVI       A,DMUL
          CALL      OUTIT     ;DO THE MULTIPLY

          MVI       B,4       ;GETTING 4 BYTES
          LXI       H,NUMB-1  ;GET THE FIRST NUMBER AGAIN
          OUTDR               ;PUT IT IN THE APU
          MVI       A,DDIV
          CALL      OUTIT     ;DO THE DIVIDE

          LXI       H,APUSTOR ;GET READY TO STORE THE DATA
          MVI       B,4       ;4 BYTES
          INIR                ;GET THE RESULTS

          LXI       H,NUMB    ;COMPAIR THE ANSWER
          LXI       D,APUSTOR
          LXI       B,4
          CALL      COMPX
          RET

;============================================================
;    THIS TEST WILL CHECK TO SEE IF THE CORRECT RESULTS ARE
;    RETURNED IF THE BUSY BIT IF THE APU IS NOT CHECKED.
;
;
IX        DB        0,0,0,5
IY        DB        0,0,0,0FH
IR        DB        0,0BH,96H,4FH

APUT6:
          MVI       C,APUDAT
          MVI       B,4
          LXI       H,IY+3
          OUTDR               ;LOAD THE OPERANDS IN THE APU
          MVI       A,FLTD
          CALL      OUTIT     ;CONVERT TO FLOATING POINT

          MVI       B,4
          LXI       H,IX+3
          OUTDR               ;LOAD SECOND OPERAND
          MVI       A,FLTD
�          CALL      OUTIT     ;CONVERT TO FLOATING POINT

          MVI       A,PWR
          OUT       APUSTAT   ;RAISE IT TO THE POWER

          MVI       A,FIXD
          CALL      OUTIT     ;CONVERT TO FIXED POINT

          LXI       H,APUSTOR
          MVI       B,4
          INIR                ;GET THE RESULT

          LXI       H,IR
          LXI       D,APUSTOR
          LXI       B,3       ;JUST CHCK HIGH 3 BYTES - LOW PRECISION
          CALL      COMPX     ;COMPAIR THE RESULT

          RET                 ;AND RETURN


;============================================================
;    THIS TEST WILL CHECK THE FOUR 16 BIT FUNCTIONS
;    BY ADDING A NUMBER TO ITSELF- THEN SUBTRACTING ITSELF-
;    THEN MULTIPLYING AND DIVIDING.  THE RESULT SHOULD BE THE
;    ORIGIONAL NUMBER

NUM       DB        0,0FH,0,0FH

APUT7:
          MVI       C,APUDAT
          MVI       B,4       ;MOVING 4 BYTES
          LXI       H,NUM+3   ;START WITH THE LOW BIT
          OUTDR               ;LOAD THE APU
          MVI       A,SADD    ;GET READY TO ADD
          CALL      OUTIT     ;DO THE ADD
          
          MVI       B,2       ;READY TO LOAD ANOTHER OPERAND
          LXI       H,NUM+1
          OUTDR               ;LOAD THE APU
          MVI       A,SSUB    ;GET READY TO SUBTRACT
          CALL      OUTIT     ;DO THE SUBTRACT
          
          MVI       B,2       ;READY TO LOAD NEXT OPERAND
          LXI       H,NUM+1   
          OUTDR               ;LOAD THE APU
          MVI       A,SMUL    ;GET READY TO MULTIPLY
          CALL      OUTIT     ;DO THE MULTIPLY


          MVI       B,2       ;READY TO LOAD NEXT OPERAND
          LXI       H,NUM+1
          OUTDR               ;LOAD THE APU
          MVI       A,SDIV
          CALL      OUTIT     ;DI THE DIVIDE

�          LXI       H,APUSTOR ;GET READY TO STORE THE RESULTS
          MVI       B,2       ;IT WILL BE 2 BYTES LONG
          INIR                ;MOVE IT INTO MEMORY

          LXI       H,NUM     ;GET THE ADDRESS OF THE NUMBER
          LXI       D,APUSTOR ;GET THE ADDRESS OF THE RESULT
          LXI       B,2       ;ITS TWO BYTES LONG
          CALL      COMPX     ;COMPAIR THE RESULTS

          RET                 ;TO THE BACKGROUND


;============================================================
;    THIS TEST WILL DO A TEST OF THE FOLLOWING FUNCTIONS
;    SQRT, PWR, FIXD, FLTD, CHSF
;
NUMX      DB        0,0,0FH,0FFH
NUMY      DB        0,0,0,2
RES1      DB        0,0FFH,0E0H,01
RES2      DB        0,0FFH,0DFH
APOP4:    LXI       H,APUSTOR ;GET READY TO STORE THE RESULTS
          MVI       B,4       ;4 BYTES OF DATA 32 BITS
          INIR                ;MOVE IT INTO MEMORY
          RET

APUSH4:   MVI       B,4       ;PUSHING IN 4 BYTES
          LXI       H,APUSTOR+3 ;USE THE LAST ANSWER
          OUTDR
          RET

GOCOMP:   LXI       D,APUSTOR ;THE ADDRESS OF THE RESULT
          LXI       B,3       ;TESTING 3 BYTES
          CALL      COMPX     ;DO THE COMPAIR
          RET

APUT8:    MVI       C,APUDAT  ;GET THE OUTPUT PORT
          MVI       B,4       ;GOING TO PUSH IN 4 BYTES
          LXI       H,NUMX+3
          OUTDR               ;LOAD THE APU

          MVI       A,FLTD    ;CONVERT TO FLOATING POINT
          CALL      OUTIT

          MVI       A,FIXD    ;CONVERT TO FIXED
          CALL      OUTIT

          CALL      APOP4     ;GET THE TOS
          LXI       H,NUMX    ;RESULT SHOULD BE WHAT WAS PUT IN
          CALL      GOCOMP

APWR:     MVI       C,APUDAT
          CALL      APUSH4    ;GET THE NUMBER BACK
          MVI       A,FLTD    ;CONVERT TO F.P
          CALL      OUTIT

�          MVI       B,4
          LXI       H,NUMY+3  ;PUSH IN TO POWER OF TEN
          OUTDR
          MVI       A,FLTD    ;FLOAT IT
          CALL      OUTIT

          MVI       A,PWR     ;RAISE TO THE PWR OF NUMY
          CALL      OUTIT

          MVI       A,FIXD    ;CONVERT TO FIXED
          CALL      OUTIT

          CALL      APOP4     ;GET THE RESULT
          LXI       H,RES2    ;SHOULD BE RESULT 2
          CALL      GOCOMP    ;GO DO THE COMPAIR

SQRTT:    MVI       C,APUDAT
          MVI       B,4
          LXI       H,RES1+3
          OUTDR

          MVI       A,FLTD    ;CONVERT TO F.P
          CALL      OUTIT

          MVI       A,SQRT    ;TAKE THE SQUARE ROOT
          CALL      OUTIT

          MVI       A,FIXD    ;CONVERT TO FIXED POINT
          CALL      OUTIT

          CALL      APOP4
          LXI       H,NUMX    ;THE RESULT SHOULD BE NUMX
          CALL      GOCOMP


          RET                 ;FROM TEST 8


;============================================================
;THIS IS THE MAIN DRIVER FOR THIS MODULE
;============================================================
;
APUT:                  ;SAVE THE REGISTERS FOR PASCAL
          PUSH      H
          
          XRA       A    
          STA       APUERR    ;ZERO THE ERROR FLAG
          STA       APUERR+1

INIT:     MVI       A,1AH     ;TO INITIALIZE , PUSH PI
          CALL      OUTIT     ;ONTO STACK
          MVI       B,16      ;WE WILL POP NO MORE THAN 16
INIT1:    IN        APUDAT    ;READ THE DATA PORT
          CPI       0DAH      ;THIS IS WHAT IT SHOULD BE
          JZ        T1        ;CHECK THE WHOLE STACK
�          DCR       B         ;COUNT IT
          JNZ       INIT1
          LXI       H,APUERR+1
          MVI       M,01H
          JMP       XIT

T1:       MVI       A,ATEST1  ;SET THE TEST BEING DONE
          STA       ATEST     
          CALL      APUT1   ;CALL THE TEST

T2:       MVI       A,ATEST2
          STA       ATEST
          CALL      APUT2

T3:       MVI       A,ATEST3
          STA       ATEST
          CALL      APUT3


T4:       MVI       A,ATEST4
          STA       ATEST
          CALL      APUT4

T5:       MVI       A,ATEST5
          STA       ATEST
          CALL      APUT5

T6:       MVI       A,ATEST6
          STA       ATEST
          CALL      APUT6

T7:       MVI       A,ATEST7
          STA       ATEST
          CALL      APUT7

T8:       MVI       A,ATEST8
          STA       ATEST
          CALL      APUT8

XIT:      XRA       A         ;GET READY TO RETURN TO PASCAL
          LXI       H,APUERR  ;THE ADDRESS OF THE ERROR FLAG
          MOV       E,M       ;PUT THE ERROR FLAG IN E
          INX       H
          MOV       D,M       ;ZERO D
          POP       H
          RET                 ;RETURN TO PASCAL


