* Use this script with EMMA if you connect to MCI Mail via TYMNET.
*
* To prepare this script, copy it to a file called EMMA.CSF and then edit
* it as follows:
*
* (1)	Change the port parameters on the line marked *1*.  The first number
*	indicates the COM port that EMMA is to use; it may be 1, 2, 3
*	or 4.  The second number indicates the line speed in bits per
*	second; it must be given in double-quotes.  Examples are "1200" and
*	"2400".
*
* (2)	Adjust the dialing string on the line marked *2*.  First, change
*	the telephone number to that appropriate for your location.  Be
*	careful not to delete the ^M at the end of the string.  You might
*	also need to change "ATDT" to "ATDP" to accomodate pulse dialing,
*	or put a "9," before the number if you are dialing through a PBX.
*
* (3)	Replace "username" in the line marked *3* with your MCI Mail
*	username in double quotes.
*
* (4)	Replace "password" in the line marked *4* with your MCI Mail
*	password in double quotes.
*
* (5)	Remove these comments.  That is, delete all lines from the top
*	of the file down to and including the line of asterisks.
*******************************************************************************
C	"Connecting to MCI Mail via TYMNET^M^J"
C	"(Press the Escape key if you need to abort the session.)^M^J"
P  1	"2400"		*1*	Your COM port number and speed go in this line
T	"ATZ^M"
R  5	"OK^M^J"
D  1
T	"ATE1 S7=45^M"		Echo commands.  Wait 45 secs for carrier.
R  5	"OK^M^J"
T	"ATDTXXX-XXXX^M"	*2* Your local TYMNET number goes in this line
R 40	"CONNECT"
B
D  8
T	"A"
R 15	":"
T	"^H^RMCILINK^M"
R 10	"name:"
T	"username"	*3*	Your username goes on this line
T	"/batch:1ST/"
T	"password"	*4*	Your password goes on this line
T	"^M"
R 20	"COM^M^J"
M
D  1
T	"+++"
R 10	"OK"
D  1
T	"ATH0^M"
R 10	"^M^J"
T	"ATZ^M"
C	"You will find any new mail in file MAIL.IN"