; sample config file for oMMM v1.52
;

; Matrix address of system. Specify a Zone other then 0 to operate in Zone
; aware mode (Like the old -Z or ZONE verb).
; Be sure to include all your addresses, so that oMMM won't try to export
; a msg that is addressed to you.
; The first address should be your primary address. It may be overridden
; on the command line. It must have a zone, the rest of the addresses will
; use the zone from the primary address, unless specifically declared.

; example to operate in single zone (not zone aware mode):
;address        0:109/315.0      ; primary address. (-aZ:N/n)

; the following example operates in zone aware mode. Also note that
; 'shorthand' is used, since the first address has a zone number, the
; remaining addresses will use the same zone number, until another zone
; number is expicitly declared. Also note that point numbers may be
; included, altough oMMM currently doesn't have much support for point
; addressing yet.

; Address 1:23456/78.0  ; this is the primary address
; Address 1:123/456.78  ; the rest are aka's
; Address 1/215         ; up to 15 addresses may be specified
; Address 114/100
; Address 1079/1
; Address 114/18.1

; message path is the path to your netmail (matrix) message subdirectory

messagepath     c:\bink\mail

; holdpath is the path to your outbound message holding area
; if you plan to use zone support, only specify your primary outbound path

holdpath        c:\bink\outbound

; prescanpath is the full pathname of your prescan routing file

;prescanpath    c:\bink\prescan.ctl

; routefile points to where your routing control file is

routefile       c:\bink\ommm.ctl

; uncomment no_forward if you don't want ommm to forward messages from
; other systems

;no_forward            ; Won't forward messages to other systems. (-f)

; the mo? verb is necessary if you will be communicating with version 1.03
; opera that do their own mail unpacking... they don't recognize the tu?, we?,
; etc. compressed mail extensions without an attach message

;mo?                    ; oldstyle arcmail names? (-o)

; use gate route if you want ommm to route all your interzone messages
; through the zone gates.  this isn't necessary if you are using msged, as it
; does the gate routing for you (unless the message is marked crash).

;gateroute              ; gateroute messages? (-g)

; if you mailer does not require a poll, packet or bundle to accompany a
; file request (a la Binkley), uncomment naked.

;naked                  ; generate naked requests (-r)

; oMMM will add new packets to any bundles it finds. If you want oMMM to make
; new bundles of the flavor defined in your routing file, uncomment no_add.
; NOTE: oMMM now treats each routing verb as if the ADD was part of it. The
; ADD verbs (ie: ARCADDCM, ONEADDCM, etc...) are not going to be around
; much longer.

;no_add                 ; do not add to existing bundles (-u)

; To suppress some of the displays, operate in Quiet Mode.

;quiet                  ; operate in quiet mode (-q)

; Normalize the holding area so No-send packets are sent.

;Normal                 ; Normalize the hold area (-n)

; Specify the maximum Archive size.

;maxarc 512K            ; maximum archive in KB (-x)

; Delete bundles after sitting around too long.

;oldbundle 7            ; Kill bundles after so many days (-t)

; define file compressors
; ARCA is the default if none are specified.
;

  Define_Stuffer  ARCA            arc2 a5
; Define_Stuffer  PKARC           pkarc -oct a
; Define_Stuffer  PAK     pak a
  Define_Stuffer  ZOO             zoo -add
  Define_Stuffer  ZIP             pkzip2 -a
  Define_Stuffer  LHARC           LH A
; Stuffer  LHARC            307/1 7 381/48
; Stuffer  PKARC            114/23
; Stuffer  ZIP              123/456
; Stuffer  PAK         114/80
; Stuffer  ZOO                   3:123/456
; Stuffer ARCA 2:123/4567