[Options]
;Start-up settings for most of the commands in the Options menu
;(0 = OFF, 1 = ON).

ScriptWindow=0
Toolbox=1
StatusBar=1

LayerIcons=1
ActiveLayerIndicator=0

AxisOnGrids=0		;Sets the axis grid.
LabelsOnGrids=0	;Sets the labels grid.


[Display]

PercentNoUpdate=70
	;Do not update the window if it is more then
	;PercentNoUpdate % covered by other windows

MaxShowPoints=300
	;If number of data points to be displayed is
	;greater than MaxShowPoints, skip drawing neighbouring
	;points such that no more than MaxShowPoints
	;are drawn.  This will speed screen display when
	;working with large data files.  Printing is not affected.
	;All data points will print.

SplineStep = 30
	; This number control the resolution(in 0.1 pts)
	; in spline creation. The smaller the number,
	; the finer the spline, but the longer to print or draw.
	; if = 10, spline point is calculated with an
	; increment equal to 1 Point size in the X direction.
	
AxisOnGridSize=20
LabelsOnGridSize=20
	;Sets the spacing of grid lines in the axis and label grids.
	;Grid sizes are in 1/1000 of paper width.


ConnectMissing = 0
	; Determines how missing data are plotted.
	; 0 = "do not connect adjacent data points".
	; 1 = "connect adjacent data points".


	; The following are the default settings
	; for data display
LineWidth=100
	;in percent of one point (1/72 inch).

Color=0
	;black=0,red=1,green=2,etc.




[Axis]
	; The following are default settings that
	; affect the axes only
LineWidth=150
	;in percent of one point (1/72 inch).
	;Please note, these numbers used to be in
	;1/500 units

Color=0
	;black=0,red=1,green=2,etc.


MajorGridWidth = 50
MinorGridWidth = 30
	;in percent of one point (1/72 inch).

LabelColor=0
MajorGridColor=3
MinorGridColor=2

MajorGridDash = 0
MinorGridDash = 2

TickLength = 80
	; in 1/720 of an inch
	; or 1/10 of a point
	
MinorTickLength = 50
	; in percent of TickLength

TickOutGap = 70
	; in percent of TickLength
	; the distance between the axis tick
	; labels and the ticks when they are outside

TickInGap = 110
	; in percent of TickLength
	; the distance between the axis tick
	; labels and the ticks when they are inside

TitleGap = 100
	; in percent of TickLength
	; the distance between the axis numeric
	; labels and the axis title
	; 50 = no gap, 60 = 10% gap out, 40 = 10% in


Tick1E0as1 = 0
	; For log scale, how to display 10^0 and 10^1
	; = 1 will display 10^0 as 1 and 10^1 as 10
	; = 0 will leave them as they are


[Font]
;Origin use both bitmap and vector fonts from Windows.
;The bitmap fonts are better looking but may not be 
;sized exactly when printing, or when pasted into other
;applications. Unless you have a PostScript printer, 
;you are advised to use the vector fonts:Roman,Modern.

LabelFontName = Helv
	;Use Roman or Modern for true WYSIWYG
	
LabelFontSize = 18

DefaultFontName = Modern

[Symbol]

BorderWidth = 15
	; in percentage of an open symbol's
	; half diameter
	
LineSymbolGap =30
	; in percentage of a symbol's diameter
	; if = 0, there would be no gap.
	; max gap = 256
	
[Text]
;The following four numbers are percent of currently selected font size
LineSpacing = 25
SubScriptSize = 70
SubScriptOffset = 68
SuperScriptOffset = 20

ScrViewNoFonts = 1
	; for even faster screen update. Also provides better reading when
	; ATM is being used.  Disables all fonts and uses only
	; the system font for screen display.  Printing is not affected.



[Dash]
;The following parameter controls
;whether to use Origin's software dashed line
;or the device driver's dashed line.  1 = Use Origin's.
Software = 1


;Origin dash patterns are adjustable
;by setting the dash parameters, below.
;The various numbers specify the length
;of the line and the width of gap segments.

;- - -
dash1 = 20 22

;....
dash2 = 5 20

;_._._
dash3 = 24 12 5 12

;_.._..
dash4 = 18 12 5 12 5 12



[Data]
;Data set in origin can be in either
;double precision or in 4 bytes floating point
;Setting Double=0 will allow for twice the
;data to be used in Origin
Double=1;0 for single precision 1 for double

[Math]
AngularUnit=0
	;0 = radian
	;1 = degree
	;2 = Grad

[Import]
ReadMissingData = 0
	; ASCII import
	; if = 0, import will terminate
	; when non numeric is encountered on
	; numeric columns.
	; if = 1, import will terminate 
	; only if the end of file is reached.