formver = 201
dataver = 201
delimchar = ,
stringdelim = "

ALERT AUTA , 11, 13, 51,11
""
BEGIN
ENTRY	"Modifiying AUTOEXEC.BAT ...				 "
ENTRY	"If you do not choose to let the installation"
ENTRY	"program modify your AUTOEXEC.BAT file, you must"
ENTRY	"make the necessary modifications manually in"
ENTRY	"order for TIGA programs to function properly."
ENTRY	"Consult the Hercules Graphics Station Owner's"
ENTRY	"Manual for instuctions."
ENTRY	"Modify AUTOEXEC.BAT? (Y/N - Esc to quit)"
END

ALERT AUTB , 11, 18, 51, 6
""
BEGIN
ENTRY	"AUTOEXEC.BAT was successfully modified.         "
ENTRY	"Please strike a key to continue..."
END


ALERT AUTC , 11,20,51,12
""
BEGIN
ENTRY	"AUTOEXEC.BAT was too large to modify."
ENTRY	"Please strike a key to continue..."
END

ALERT AUTD , 11,20,51,12
""
BEGIN
ENTRY	"Not enough memory to load AUTOEXEC.BAT."
ENTRY	"Please strike a key to continue..."
END

ALERT AUTE , 11,20,51,12
""
BEGIN
ENTRY	"Error reading the AUTOEXEC.BAT file."
ENTRY	"Please strike a key to continue..."
END

ALERT AUTF , 11,20,51,12
""
BEGIN
ENTRY	"Error writing the AUTOEXEC.BAT file."
ENTRY	"Please strike a key to continue..."
END

ALERT WRNA , 9, 10, 59, 5
""
BEGIN
ENTRY	"TIGA will be installed for 640x480 format. Proceed Y/N?"
END


ALERT WRNB ,9, 10,67,14
"Attention!"
BEGIN
ENTRY	"You have indicated that TIGA should operate in 800x600 format."
ENTRY	"The monitor attached to the Hercules Graphics Station Card must"
ENTRY	"be capable of supporting this display format. If you are not"
ENTRY	"certain that the monitor will support 800x600, press N and"
ENTRY	"confirm the monitor's capabilities. A monitor can be damaged as"
ENTRY	"a result of receiving a signal outside of its rated operating"
ENTRY	"range."
ENTRY	"TIGA will be installed for 800x600 format. Proceed Y/N?"
END

ALERT WRNC ,9, 10,68,14
"Attention!"
BEGIN
ENTRY	"You have indicated that TIGA should operate in 1024x768"
ENTRY	"interlaced format. The monitor attached to the Hercules Graphics"
ENTRY	"Station Card must be capable of supporting this display format."
ENTRY	"If you are not certain that the monitor will support 1024x768"
ENTRY	"interlaced operation, press N and confirm the monitor's"
ENTRY	"capabilities. A monitor can be damaged as a result of receiving"
ENTRY	"a signal outside of its rated operating range."
ENTRY	"TIGA will be installed for 1024x768 interlaced format."
ENTRY	"Proceed Y/N?"
END

ALERT WRND ,9, 10,68,13
"Attention!"
BEGIN
ENTRY	"You have indicated that TIGA should operate in 1024x768"
ENTRY	"format. The monitor attached to the Hercules Graphics"
ENTRY	"Station Card must be capable of supporting this display"
ENTRY	"format. If you are not certain that the monitor will support"
ENTRY	"1024x768 operation, press N and confirm the monitor's"
ENTRY	"capabilities. A monitor can be damaged as a result of"
ENTRY	"receiving a signal outside of its rated operating range."
ENTRY	"TIGA will be installed for 1024x768 format."
ENTRY	"Proceed Y/N?" );
END

ALERT WRNE ,9, 10,67,9
"Attention!"
BEGIN
ENTRY	"You have indicated that TIGA should operate in 512x480 format."
ENTRY	"The drivers for AutoCad and Windows do not yet support this "
ENTRY	"mode. Please make another selection by pressing N."
END

ALERT WRNF , 10,15,68,8
"Attention!"
BEGIN
ENTRY	"There are no monitor files found in the TIGA directory. Check  "
ENTRY	"to make certain that the MODES subdirectory of the default TIGA"
ENTRY	"directory contains the proper .CL and .CFG files. Hit any key  "
ENTRY	"to continue.                                                   "
END

ALERT MESA ,10,11,59,6
""
BEGIN
ENTRY	"Error - file not written. Strike a key to continue."
END

ALERT MESB ,10,10,59,9
"Attention!"
BEGIN
ENTRY	"You have now completed installation. If you did not   "
ENTRY	"modify the Autoexec.bat file, you should do so now.   "
ENTRY	"After installing this version, you should reboot your "
ENTRY	"machine before proceeding.                            "
END

ALERT MESC ,10,11,59,7
"Attention!"
BEGIN
ENTRY	"You have changed TIGA parameter settings. You must "
ENTRY	"reboot your system in order for the new settings you"
ENTRY	"have just selected to take effect. Hit any key to  "
ENTRY	"continue."
END

SELECT MODE ,7,10,57,9
"Resolutions:"
BEGIN
ENTRY	"0", "(1) 640 x 480 x 8 (standard VGA monitors)            ","WRNA"
ENTRY	"1", "(2) 640 x 480 x 16 (standard VGA monitors)           ","WRNA"
ENTRY	"2", "(3) 800 x 600 x 8 (enhanced VGA monitors)            ","WRNB"
ENTRY	"3", "(4) 1024 x 768 x 8 (e.g. Multisync 4D)               ","WRND"
ENTRY	"27","(5) Return to main menu                              ",""
END

SELECT DRVR ,8,10,58,8
"Drivers:"
BEGIN
ENTRY	"0" ,"(1) Install Windows 3.0 driver  ","\WIN3"
ENTRY	"1" ,"(2) Install Windows 2.0 driver  ","\WINDOWS"
ENTRY 	"2" ,"(3) Install AutoCad ADI 4.0     ","\ACAD"
ENTRY	"27","(4) Exit ( or hit ESC key )     ",""
END

SELECT MAIN ,5,9,58,8
""
BEGIN
ENTRY	"0","(1) Copy Hercules supplied TIGA files to your system  ",""
ENTRY	"1","(2) Select monitor configuration for TIGA applications",""
ENTRY	"2","(3) Select screen resolution for TIGA applications    ",""
ENTRY	"3","(4) Exit ( or hit ESC key )                           ",""
END

SELECT MODA , 30,16,48,8
"Resolutions:"
BEGIN
ENTRY	"0", "(1) 640 x 480 x 8 (standard VGA monitors)  ","WRNA"
ENTRY	"1", "(2) 640 x 480 x 16 (standard VGA monitors) ","WRNA"
ENTRY	"2", "(3) 800 x 600 x 8 (enhanced VGA monitors)  ","WRNB"
ENTRY	"3", "(4) 1024 x 768 x 8 (e.g. Multisync 4D)     ","WRND"
END


MONITORS MONS, 30,17,48,7
"Monitors:"
BEGIN
END