** Program : PopCalc7.prg
** Purpose : Pop-up Calculator 
** dBASE   : dBASE IV version 1.1
** Written : 05/10/89
** Author  : Richard Price ... ATBBS:  HAMMETT
**                         ... CIS:    71157,762
** Revised : 05/10/89 - PopCalc3 ... Tape and Paste
**         : 06/13/89 - PopCalc4 ... Added shadowing.
**         : 08/08/90 - PopCalc5 ... Moving Windows.
**         : 12/12/90 - PopCalc6 ... Renamed variables
**                      using standardized conventions.
**                      Modified shadow effects.
**                      Removed all @..GET/READS.
**                      Instigated use of a memory file.
**                      Re-configurable at runtime.
**                      Exploding Windows/Shadows.
**                      Opaque or transparent shadows
**                      provided for move/nomove 
**                      windowing capabilities.
**                      Modified to run from within
**                      any dB4 1.1 application without
**                      changes to either PopCalc7
**                      or the calling program.
**         : 12/17/90   PopCalc7 ... Renamed to avoid 
**                      confusion with PopCalc6.ZIP on
**                      the BBS's
**                      Added UDF TrimZero() to trim 
**                      trailing 0's and decimal point
**                      from numbers passed by paste
**                      routines.

**           All user input in PopCalc7 is via INKEY(0).
**           Processing is based upon either its ASCII value 
**           or its string representation. 
**           Processing the calculator's inkey(0) and 
**           chr(inkey()) is as follows:

**              Key       ACTION
**            -------  ---------------------------------
**              0-9    Numerical input.
**               .         "       "
**               M     Activate Memory Processing
**               T     Activate Tape Display
**               P     Activate Paste Display
**               C     Clear current entry and answer,
**                     and reset operators
**               E     Clear current entry only.
**               +     Add
**               -     Subtract
**               /     Division
**               *     Multiplication
**               ^     Exponentiation
**               =     Provides total/clears operator.
**             ENTER   Same as =
**               R     "R"econfigure PopCalc7 options.
**                     Opens a dialog box to enable/
**                     disable Shadow Windows, Window 
**                     Movement, Exploding Opening 
**                     Window, and resetting the tape 
**                     size.
**               F1    HELP

**           Processing from within Memory mode follows:

**              Key        ACTION
**            -------  ---------------------------------
**                R    Recall value held in Memory 
**                C    Clear Memory 
**                +    Add to Memory
**                -    Subtract from Answer
**                /    Divide memory
**                *    Multiply memory
**                ^    Exponentiate memory
**                =    Provides a total and clears the
**                     memory operator.
**               F1    HELP

** NOTE: Memvars which will be saved to PopCalc7.MEM
**       are designated as m<type>_
**       ml_<name> = logical memvars
**       mn_<name> = numerical memvars
**       mc_<name> = character memvars
**       ma_<name> = array memvars

**    There are four (4) "configuration" memvars 
**    which the user may change from within PopCalc7.
**    ml_Shadow  = .t. for shadow usage
**    ml_Explode = .t. for exploding windows
**    ml_Move    = .t. enables moving windows.
**    mn_TapeSiz = Number used to declare the
**                 tape array.
**    These memvars can be changed by pressing
**    "R" while in the main calculator window.

**    NOTE:  If movement is not enabled, then
**           shadowing routine is different.
**           In order to move windows with shadows,
**           the shadow must be in the form of
**           a window, and the shadow is opaque
**           and the underlying screen is hidden.
**
**           If movement is disabled, then the
**           shadow can be transparent, and the
**           underlying screen will be dimmed,
**           but visible.
**           All shadowing will be exploded,
**           when shadowing is enabled.

**    WHY?   Because I like it that way! 


PROCEDURE PopCalc7
**       Save the current screen and activate.
SAVE SCREEN TO POPSCR_1
ACTIVATE SCREEN
**       Save and set the environment.
IF SET("TALK")="ON"
   SET TALK OFF
   lc_PCTalk = "ON"
ELSE
   SET TALK OFF
   lc_PCTalk = "OFF"
ENDIF
ll_PCStat = (SET("STATUS")="ON")
lc_PCBell  = SET("BELL")
lc_PCEsc   = SET("ESCAPE")
lc_PCDelim = SET("DELIMITER")
lc_PCCurs  = SET("CURSOR")
SET BELL OFF
SET ESCAPE OFF
SET DELIMITERS OFF
SET CURSOR OFF
SET BORDER TO
IF TYPE("gc_PopCalc")="U".OR..NOT.FILE("PopCalc7.MEM")
   PUBLIC gc_PopCalc
   STORE .t. TO ml_Shadow, ml_Move
   STORE .f. TO ml_Explode
   STORE 0 TO mn_CalcAns, mn_Mem, mn_TapeCnt
   STORE 0 TO mn_TapeNum, mn_TapeEnd
   ** PCW.... (P)op (C)alc6 (W)indow settings
   mn_PCWRow1 = 1
   mn_PCWCol1 = 24
   mn_PCWRow2 = 16
   mn_PCWCol2 = 53
   ** PTW.... (P)op (T)ape (W)indow settings
   mn_PTWRow1 = 3
   mn_PTWCol1 = 49
   mn_PTWRow2 = 20
   mn_PTWCol2 = 68
   mc_KeyStr  = " "
   mc_Operatr = "+"
   mc_Entry   = space(14)
   mn_TapeSiz = 100
   DECLARE ma_Tape[mn_TapeSiz,2]
   DO TapeInit
ELSE
   RESTORE FROM PopCalc7 ADDITIVE
ENDIF
ll_Reset = .t.
DO WHILE ll_Reset
   ll_Reset = .f.
   ll_ShadWin = (ml_Shadow .AND. ml_Move)
   **    Display the calculator window.
   DO CalcDisp
   **    Obtain and process user input.
   DO Calc_Key
   **    Restore the screen
   RESTORE SCREEN FROM POPSCR_1
ENDDO
**       Restore the working environment.
RELEASE SCREEN POPSCR_1
lc_PCSafe = SET("SAFETY")
SET SAFETY OFF
SAVE TO PopCalc7 ALL LIKE M?_*
SET SAFETY &lc_PCSafe.
SET BELL &lc_PCBell.
SET DELIM &lc_PCDelim.
SET CURSOR &lc_PCCurs.
SET ESCAPE &lc_PCEsc.
SET TALK &lc_PCTalk.
RETURN

PROCEDURE CalcDisp
**    Build the PopCalc7 calculator display.
**    Specifying the color on the @ .. SAY lines is
**    required due to a known dBASE IV 1.1 bug which,
**    under certain circumstances, the default window
**    colors are changed by the calling program.
**    Also, I happen to like highlighting the
**    available keys for display purposes.

**    Actually, the whole window PopCalc7 could be
**    smaller and the only area one truly needs is
**    the ANSWER line with possibly the MEMORY line
**    added to view the current value held in MEMORY.

**    Verify Window Limits (and fix if necessary).
**    REASON: If PopCalc7 was entered previously with
**            shadowing disabled, AND window(s) were
**            positioned on line 24, OR column > 78
**            AND the next entry to PopCalc7 is with
**            shadowing on, a window definition error
**            would occur for the shadowing windows.

ln_MaxRow  = IIF(ll_PCStat,23,24) - ;
   IIF(ml_Shadow,1,0)

ln_AdjWin  = ;
   IIF(mn_PCWRow2>ln_MaxRow,mn_PCWRow2-ln_MaxRow,0)

mn_PCWRow1 = mn_PCWRow1 - ln_AdjWin
mn_PCWRow2 = mn_PCWRow2 - ln_AdjWin

ln_AdjWin = ;
   IIF(ml_Shadow,IIF(mn_PCWCol2>78,;
   IIF(mn_PCWCol2=79,2,1),0),0)

mn_PCWCol1 = mn_PCWCol1 - ln_AdjWin
mn_PCWCol2 = mn_PCWCol2 - ln_AdjWin

ln_AdjWin  = ;
   IIF(mn_PTWRow2>ln_MaxRow,mn_PTWRow2-ln_MaxRow,0)

mn_PTWRow1 = mn_PTWRow1 - ln_AdjWin
mn_PTWRow2 = mn_PTWRow2 - ln_AdjWin

ln_AdjWin = ;
   IIF(ml_Shadow,IIF(mn_PTWCol2>78,;
   IIF(mn_PTWCol2=79,2,1),0),0)

mn_PTWCol1 = mn_PTWCol1 - ln_AdjWin
mn_PTWCol2 = mn_PTWCol2 - ln_AdjWin

RELEASE ln_AdjWin, ln_MaxRow

DEFINE WINDOW PopCalc7 ;
   FROM mn_PCWRow1, mn_PCWCol1 ;
   TO mn_PCWRow2,mn_PCWCol2 ;
   DOUBLE color w+/rg,rg/rg,w+/rg
DO CASE
   CASE ml_Explode
      **    Do an exploding window routine.
      DO Exp_Main
   CASE ml_Shadow
      **    Provide an exploding shadow when
      **    shadowing is enabled.
      DO EXPSHADO with ;
      mn_PCWRow1 , mn_PCWCol1, mn_PCWRow2,mn_PCWCol2
      IF ml_Move
         DEFINE WINDOW ShadCalc ;
            FROM mn_PCWRow1 + 1, mn_PCWCol1 + 2 ;
            TO mn_PCWRow2 + 1, mn_PCWCol2 + 2 ;
            PANEL color w/n,w/n,n/w
         DEAC WINDOW PopCalc7
         RESTORE SCREEN FROM POPSCR_1
         ACTIVATE SCREEN
         ACTIVATE WINDOW ShadCalc
      ENDIF
      ACTIVATE WINDOW PopCalc7
   OTHERWISE
      ACTIVATE WINDOW PopCalc7
ENDCASE
@ 0,8 SAY "< PopCalc7 >" color rg+/RG
@ 1,3 SAY "Entry :" color w+/RG
@ 1,11 SAY mc_Entry pict "#########.####" color N/w
@ 2,0 to 2,27 color w+/rg
@ 3,3 SAY "Answer:" color w+/rg
@ 3,11 SAY mn_CalcAns PICT "#########.####" color n/w
@ 4,0 to 4,27 DOUB color w+/rg
@ 4,3 SAY " Memory " color w+/rg
@ 4,14 SAY "ั" color w+/rg  && CHR(209)
@ 4,17 SAY " Numeric "color w+/rg
@ 5,14 TO 11,14 color w+/rg
@ 12,0 to 12,27 doub color w+/rg
@ 12,14 SAY "ฯ" color w+/rg  && CHR(207)
@ 8,0 TO 8,13 color w+/rg
@ 8,14 SAY "ด" color w+/rg  && CHR(180)
@ 8,4 SAY " Mem= " color w+/rg
@ 9,0 SAY mn_Mem pict "@Z #########.####" color B/w
@ 10,0 TO 10,13 color w+/rg
@ 10,14 SAY "ด" color w+/rg  && CHR(180)
@ 11,1 SAY "T" color n/w
@ 11,2 SAY "ape" color w+/rg
@ 11,6 SAY "I" color n/w
@ 11,7 SAY "m" color w+/rg
@ 11,8 SAY "P" color n/w
@ 11,9 say "aste" color w+/rg
@ 6,1 SAY "M" color b/w
@ 5,4 SAY "R + - *" color n/w
@ 7,4 SAY "C / ^" color n/w
@ 5,5 fill to 7,5 color w/rg
@ 5,7 fill to 7,7 color w/rg
@ 5,9 fill to 7,9 color w/rg
@ 5,17 SAY "= 7 8 9 -" color n/w
@ 7,17 SAY "/ 4 5 6 +" color n/w
@ 9,17 SAY "* 1 2 3 ^" color n/w
@ 5,18 fill to 9,18 color w/rg
@ 5,20 fill to 9,20 color w/rg
@ 5,22 fill to 9,22 color w/rg
@ 5,24 fill to 9,24 color w/rg
@ 11,18 SAY " 0 " color n/w
@ 11,22 SAY " . " color n/w
@ 13,1 SAY "Esc" color n/w
@ 13,5 say "R" color n/w
@ 13,6 say "econfigure" color w+/rg
@ 13,18 SAY "C" color n/w
@ 13,21 SAY "C" color n/rg
@ 13,22 SAY "E" color n/w
@ 13,25 SAY CHR(17)+"ู" color n/w  && CHR(217)
RETURN

PROCEDURE Calc_Key
**    Loop thru calculator routine infinitly
**    until <Esc> is pressed.
DO WHIL .T.
   lc_LastStr = mc_KeyStr
   mc_KeyStr = " "
   **    Re-initialize the TAPE array if needed.
   IF mn_TapeNum = mn_TapeSiz
      DO TapeInit
   ENDI
   **    Memvar mc_Entry is a string
   **    representation of the numerical
   **    value being entered.
   @ 1,11 SAY mc_Entry color N/w
   ln_CalcKey = inkey(0)
   ln_CalcKey = IIF(ln_CalcKey=13,61,ln_CalcKey)
   mc_KeyStr = UPPER(CHR(ln_CalcKey))
   DO CASE
      CASE ln_CalcKey = 27
         **    Escape has been pressed (Exit PopCalc)
         EXIT
      CASE ln_CalcKey = 28
         ** F1 - HELP
         DO CalcHelp with 1
         mc_KeyStr = lc_LastStr
      CASE ln_CalcKey < 32 .AND. ml_Move
         DO Move_Win with ln_Calckey, mn_PCWRow1,;
            mn_PCWRow2, mn_PCWCol1, mn_PCWCol2
         mc_KeyStr = lc_LastStr
      CASE mc_KeyStr = "M"
         @ 1,26 SAY "M" color w+/rg
         @ 6,1 SAY "M" color W*/N
         mc_KeyStr = UPPER(CHR(INKEY(0)))
         IF mc_KeyStr $ "CR+-*/=^"
            **    If there is a value displayed in the
            **    ENTRY window, perform the requested 
            **    operation using that value, else 
            **    use the value held in ANSWER.
            ln_CalcNum = IIF(lc_LastStr$".0123456789",;
            VAL(mc_Entry),mn_CalcAns)
            DO MathCalc ;
               WITH mc_KeyStr, ln_CalcNum, mn_Mem
            DO MemAns
            mc_KeyStr = lc_LastStr
         ELSE
            ?? chr(7)
         ENDIF
         @ 6,1 SAY "M" color b/w
         @ 1,26 SAY mc_Operatr color w+/rg
      CASE mc_KeyStr="." .AND. "."$mc_Entry
         **  Limit number to one decimal point.
         ?? chr(7)
         mc_KeyStr = lc_LastStr
      CASE mc_KeyStr $ "0123456789."
         **    A numerical type of entry was made.
         **    Concatenate the string mc_KeyStr
         **    to mc_Entry.
         **    If maximum length (14) of mc_Entry
         **    has been reached, beep and don't
         **    concatenate
         IF LEN(LTRIM(mc_Entry)) < 14
            mc_Entry = RIGHT(mc_Entry,13) ;
            + mc_KeyStr
         ELSE
            ?? CHR(7)
         ENDIF
         **    If the old operator was "=", reset
         **    the Answer value to 0, increment the
         **    tape counter, and update the tape.
         IF mc_Operatr = "="
            mn_TapeNum=mn_TapeNum+1
            mc_Operatr="+"
            mn_CalcAns=0
         ENDIF
      CASE ln_CalcKey = 127
         **    BackSpace pressed.
         **    Clear last keyed entry and delete
         **    last number entered from mc_Entry.
         mc_Entry = " " + LEFT(mc_Entry,13)
         mc_KeyStr = " "
      CASE mc_KeyStr = "=" .AND. mc_Operatr = "="
         **    Enter or = has been keyed repeatedly.
         **    No entry has been made, so reset the
         **    operators to previous values and loop.
         mc_KeyStr=lc_LastStr
      CASE mc_KeyStr $ "+-/*^="
         **    Perform the calculations,
         **    update the operators and the tape.
         @ 1,26 SAY mc_KeyStr color w+/rg
         ln_CalcNum = VAL(mc_Entry)
         **    Update tape to indicate that the next
         **    value will be used in conjunction
         **    with the value held in Answer
         **    (mn_CalcAns) when the previous total
         **    had been requested via the ENTER key
         **    or "=" key, followed by an operator
         **    (+-*/^) rather than a numerical entry.
         IF ma_Tape[mn_TapeNum,1] = "=" ;
            .AND. ma_Tape[mn_TapeNum,2] = 0 ;
            .AND. mc_Operatr # "="
            ma_Tape[mn_TapeNum,1] = " "
            ma_Tape[mn_TapeNum,2] = mn_CalcAns
         ENDIF
         **    Increment and update the tape.
         mn_TapeNum = mn_TapeNum + 1
         ma_Tape[mn_TapeNum,1] = mc_Operatr
         ma_Tape[mn_TapeNum,2] = ln_CalcNum
         **    Perform the requested calculations.
         DO MathCalc ;
            WITH mc_Operatr, ln_CalcNum, mn_CalcAns
         **    If ENTER or "=" has been pressed,
         **    update the tape to show the answer.
         IF mc_KeyStr="="
            mn_TapeNum=mn_TapeNum+1
            ma_Tape[mn_TapeNum,1]="="
            ma_Tape[mn_TapeNum,2]=mn_CalcAns
         ENDIF
         **    Display the calculated answer.
         DO CalcAns
         **    Assign the math operator and clear
         **    current entry string mc_Entry.
         mc_Operatr=mc_KeyStr
         mc_Entry=SPAC(14)
      CASE mc_KeyStr = "I"
         **    Exit PopCalc7 and KEYBOARD the answer
         lc_CalcAns = ltrim(str(mn_CalcAns,14,4))
         lc_CalcAns = TrimZero(lc_CalcAns)
         KEYBOARD lc_CalcAns
         EXIT
      CASE mc_KeyStr = "R"
         **  User wishes to reset PopCalc7 parameters
         ll_reset = .f.
         DO PC_Param with ll_reset
         IF ll_reset
            *  Parameters have changed, must exit
            *  before new params take effect!
            EXIT
         ENDIF
      CASE mc_KeyStr = "T"
         **    Request Tape Viewing
         DO TAPEDISP
         mc_KeyStr = lc_LastStr
      CASE mc_KeyStr = "P"
         **    Request for Paste Function
         DO PASTEVAL
         mc_KeyStr = lc_LastStr
      CASE mc_KeyStr = "E"
         **    Clear the current entry only
         mc_Entry=SPACE(14)
         mc_KeyStr=lc_LastStr
      CASE mc_KeyStr = "C"
         **    Clear the current entry, answer, and
         **    reset the associated memvars.
         mc_KeyStr  = "="
         mc_Operatr   = "+"
         mc_Entry  = SPACE(14)
         mn_CalcAns = 0
         mn_TapeNum = mn_TapeNum + 1
         ma_Tape[mn_TapeNum,1] = "C"
         **    Now that the associated memvars are
         **    cleared, refresh the display.
         @ 1,26 SAY mc_KeyStr color w+/rg
         DO CalcAns
      OTHERWISE
         mc_KeyStr = lc_LastStr
   ENDCASE
ENDDO
RELEASE WINDOW PopCalc7
IF ll_ShadWin
   RELEASE WIND ShadCalc
ENDIF
RETURN

PROCEDURE MathCalc
PARAMETERS OPERATOR, VALUE, ANSWER
PRIVATE OPERATOR, VALUE, ANSWER
**    Calculate the answer for main display
**    and MEMORY display.
DO CASE
   CASE OPERATOR="+"
      ANSWER = ANSWER + VALUE
   CASE OPERATOR="-"
      ANSWER = ANSWER - VALUE
   CASE OPERATOR = "*"
      ANSWER = ANSWER * VALUE
   CASE OPERATOR="/"
      ANSWER = ANSWER / FLOAT(VALUE)
   CASE OPERATOR = "^" .AND..NOT. ;
      (ANSWER<0 .AND. VALUE<1)
      ANSWER = ANSWER ^ VALUE
   CASE OPERATOR = "^" .AND. ;
      (ANSWER<0 .AND. VALUE<1)
      * Negative number to "root"
      ?? chr(7)+chr(7)
   CASE OPERATOR = "C"
      ANSWER=0
   CASE OPERATOR="R"
      IF mc_Operatr = "="
         mn_CalcAns = 0
         mc_Operatr = "+"
      ENDI
      mc_Entry = STR(ANSWER,14,4)
ENDCASE
RETURN

PROCEDURE CalcAns
**     Diplay the calculated answer
DO CASE
   CASE mn_CalcAns<0
      **     Highlite if negative.
      @ 3,11 SAY mn_CalcAns PICT "#########.####" ;
      color R/w
   OTHERWISE
      @ 3,11 SAY mn_CalcAns PICT "#########.####" ;
      color n/w
ENDCASE
RETURN

PROCEDURE MemAns
**    Diplay the calculated Memory value
DO CASE
   CASE mn_Mem<0  && Highlite if negative.
      @ 9,0 SAY mn_Mem pict "#########.####" ;
      color R/w
   OTHERWISE
      @ 9,0 SAY mn_Mem pict "#########.####" ;
      color B/w
ENDCASE
RETURN

PROCEDURE TapeInit
** INITIALIZE TAPE ARRAY
mn_TapeNum = 0
DO WHIL mn_TapeNum < mn_TapeSiz
   mn_TapeNum = mn_TapeNum+1
   ma_Tape[mn_TapeNum,1] = " "
   STORE 0 TO ma_Tape[mn_TapeNum,2]
ENDDO
mn_TapeNum = 1
mn_TapeCnt = 1
RETURN

PROCEDURE Exp_Main
**   Explode the main calculator window.
**   (Explode its shadow if enabled)
ln_Win_R1 = ;
   INT((mn_PCWRow2-mn_PCWRow1)/2) + mn_PCWRow1
ln_Win_R2 = ln_Win_R1+1
ln_Win_C1 = ;
   INT((mn_PCWCol2-mn_PCWCol1)/2) + mn_PCWCol1
ln_Win_C2 = ln_Win_C1+1
DO WHIL .t.
   ln_Win_R1 = IIF(ln_Win_R1 > mn_PCWRow1, ;
      ln_Win_R1 -1, mn_PCWRow1)
   ln_Win_R2 = IIF(ln_Win_R2 < mn_PCWRow2, ;
      ln_Win_R2 +1, mn_PCWRow2)
   ln_Win_C1 = IIF(ln_Win_C1 > mn_PCWCol1, ;
      ln_Win_C1 -1, mn_PCWCol1)
   ln_Win_C2 = IIF(ln_Win_C2 < mn_PCWCol2, ;
      ln_Win_C2 +1, mn_PCWCol2)
   RELEASE WINDOW PopCalc7
   IF ml_Shadow
      IF ml_Move
         DEACTIVATE WINDOW ShadCalc
         DEFINE WINDOW ShadCalc ;
         FROM ln_Win_R1+1,ln_Win_C1+2 ;
         TO ln_Win_R2+1,ln_Win_C2+2 ;
         color w/n,w/n,n/n panel
         ACTIVATE WINDOW ShadCalc
      ELSE
         ACTIVATE SCREEN
         @ ln_Win_R1+1, ln_Win_C1+2 ;
         fill to ln_Win_R2+1,ln_Win_C2+2 ;
         COLOR w/n
      ENDIF
   ENDIF
   DEFINE WIND PopCalc7 ;
   FROM ln_Win_R1, ln_Win_C1 ;
   TO ln_Win_R2, ln_Win_C2 ;
   DOUB color w+/rg,rg/rg,w+/rg
   ACTIVATE WINDOW PopCalc7
   IF ln_Win_R1=mn_PCWRow1 ;
      .AND. ln_Win_R2=mn_PCWRow2 ;
      .AND. ln_Win_C1=mn_PCWCol1 ;
      .AND. ln_Win_C2=mn_PCWCol2
      ** Maximum window size has been reached!
      EXIT
   ENDIF
ENDDO
RETURN

PROCEDURE Expshado
PARAMETERS ln_Win_R1, ln_Win_C1, ln_Win_R2, ln_Win_C2
** Exploding Shadow - Top right to bottom left.
ln_Shad_R2 = ln_Win_R1 +1
ln_Shad_C2   = ln_Win_C1 + 2
ACTIVATE SCREEN
DO WHILE .t.
   ln_Shad_R2 = IIF(ln_Shad_R2<ln_Win_R2 + 1,;
   ln_Shad_R2+1,ln_Win_R2 + 1)
   ln_Shad_C2 = IIF(ln_Shad_C2<ln_Win_C2 + 2,;
   ln_Shad_C2+1, ln_Win_C2)
   @ ln_Win_R1 + 1,ln_Win_C1 + 2 ;
   FILL TO ln_Shad_R2,ln_Shad_C2 ;
   color W/N
   IF ln_Shad_R2=ln_Win_R2 + 1 ;
      .AND. ln_Shad_C2=ln_Win_C2 + 2
      EXIT
   ENDIF
ENDDO
RETURN

PROCEDURE TapeDisp
**    Provide a tape display.
**    Save current screen and activate tape window.
DO PC_OPEN2
**    "Paint" the tape window.
@ 0,2 SAY "PopCalc7 Tape" color R/W
@ 1,0 TO 1,17 COLOR n/w
@ 12,0 TO 12,17 COLOR n/w
@ 13,1 SAY " P = Print Tape" color n/w
@ 14,1 SAY " C = Clear Tape" color n/w
@ 15,1 SAY " <Esc> to exit!" color n/w
** Initialize display specific memvars.
mn_TapeCnt = mn_TapeNum
mn_TapeEnd = mn_TapeNum
mn_TapeNum=1
ln_TapeTop=0
IF mn_TapeCnt>10
   mn_TapeNum=mn_TapeCnt-9
ENDIF
DO WHIL .T.
   ln_TapeLin=2
   IF ln_TapeTop # mn_TapeNum
      **    Display only if required.
      ln_TapeTop = mn_TapeNum
      **    If there are numbers "above" currently
      **    displayed tape, indicate so, otherwise,
      **    redraw the line where "More" displays.
      IF mn_TapeNum > 1 .AND. mn_TapeEnd>9
         @ 1,10 SAY " More" + CHR(24) + " " ;
         color RG+/W
      ELSE
         @ 1,10 TO 1,17 color n/w
      ENDIF
      **    "List" the tape array in the window.
      DO WHIL mn_TapeNum <= mn_TapeEnd
         @ ln_TapeLin,1 say ma_Tape[mn_TapeNum,1] ;
         color n/w
         @ ln_TapeLin,3 say ma_Tape[mn_TapeNum,2] ;
         pict "#########.####"  color n/w
         ln_TapeLin=ln_TapeLin+1
         mn_TapeNum=mn_TapeNum+1
      ENDDO
      **    If there are numbers "below" currently
      **    displayed tape, indicate so, otherwise,
      **    redraw the line where "More" displays.
      IF mn_TapeNum<mn_TapeCnt+1
         @ 12,10 SAY " More"+CHR(25)+" ";
         color RG+/W
      ELSE
         @ 12,10 TO 12,17 color n/w
      ENDIF
   ENDIF
   ln_InKey=inkey(0)
   DO CASE
      CASE ln_Inkey = 28
         **    F1 - HELP
         DO CalcHelp with 6
         LOOP
      CASE CHR(ln_InKey)$"Cc"
         DO TapeInit
         EXIT
      CASE CHR(ln_InKey)$"Pp"
         **    Print the tape.
         DO TapePrnt
      CASE ln_InKey=27 .OR. ln_InKey = 13
         EXIT
      CASE ln_InKey=5
         **    UpArrrow - Move tape UP one.
         mn_TapeNum=ln_TapeTop-1
      CASE ln_InKey=24
         **    DownArrow - Move the tape DOWN one.
         mn_TapeNum=ln_TapeTop+1
      CASE ln_InKey=18
         **    PgUp  - Page up the tape.
         mn_TapeNum=ln_TapeTop-10
      CASE ln_InKey=3
         **    PgDn - Page down the tape.
         mn_TapeNum=ln_TapeTop+10
      CASE ln_InKey=26
         **    HOME
         **    Position the tape at the logical top.
         mn_TapeNum=1
      CASE ln_InKey=2
         **    END
         **    Position the tape at logical bottom.
         mn_TapeNum=mn_TapeCnt-9
      CASE ln_InKey < 32 .AND. ml_Move
         DO Move_Win with ln_InKey, mn_PTWRow1, ;
         mn_PTWRow2, mn_PTWCol1, mn_PTWCol2
         LOOP
      OTHERWISE
         **    Safeguard: should not get to here.
         LOOP
   ENDCASE
   IF mn_TapeCnt<=10
      mn_TapeNum=1
   ENDIF
   IF mn_TapeNum < 1
      **    mn_TapeNum cannot be less than 1.
      mn_TapeNum = 1
   ENDIF
   IF mn_TapeNum > mn_TapeCnt
      **    Check for logical end of tape.
      mn_TapeNum = ln_TapeTop
   ENDIF
   IF (mn_TapeNum+9) < mn_TapeCnt
      mn_TapeEnd = mn_TapeNum+9
   ELSE
      mn_TapeNum = ;
      IIF(mn_TapeCnt-9>0,mn_TapeCnt-9,1)
      mn_TapeEnd = mn_TapeCnt
   ENDIF
ENDDO
mn_TapeNum = mn_TapeCnt
**    Get rid of tape window - restore the screen.
DO PC_Clos2
RETURN

PROCEDURE TapePrnt
IF .NOT. printstatus()
   ?? chr(7)+chr(7)+chr(7)
   RETURN
ENDIF
SET CONS OFF
SET PRINT ON
? "PopCalc7 Tape Listing" AT 5
? "---------------------" AT 5
ln_TapeLin=1
DO WHIL ln_TapeLin<=mn_TapeCnt
   ? ma_Tape[ln_TapeLin,1] AT 6,
   ?? ma_Tape[ln_TapeLin,2] pict "#########.####" ;
   AT 8
   ln_TapeLin=ln_TapeLin+1
ENDDO
? "---------------------" AT 5
? "     End of Tape     " AT 5
SET PRINT OFF
SET CONS ON
EJECT
RETURN

PROCEDURE PasteVal
** Assign a function key as a paste key.
** Open the secondary window.
DO PC_OPEN2
@ 0,2 SAY "PopCalc7 Paste" color b/w
@ 1,0 TO 1,17 DOUB color n/w
@ 2,0  SAY "      PRESS      "  color n/w
@ 3,0  SAY "   Function Key  "  color n/w
@ 4,0 to 4,17 doub color n/w
@ 5,0  SAY "      Range"  color n/w
@ 6,0  SAY "  From      Thru"  color n/w
@ 7,0 TO 7,17 color n/w
@ 8,0  say "   F2       F10"  color n/w
@ 9,0  say "Shift-F1  Shift-F9"  color n/w
@ 10,0 say " Ctrl-F1  Ctrl-F10"  color n/w
@ 11,0 TO 11,17 doub color n/w
@ 14,0 to 14,17  color n/w
@ 15,0 SAY "  <Esc> to Abort!" color r/w
ln_FuncKey=0
** Test for a valid key press.
DO WHILE .t.
   @ 3,16
   ln_FuncKey=inkey(0)
   DO CASE
      CASE ln_FuncKey=27 .OR. ;
         (ln_FuncKey < 0 .AND. ln_FuncKey> -29)
         EXIT 
      CASE ln_FuncKey = 28
         ** F1 - HELP
         DO CalcHelp with 5
      CASE ln_FuncKey < 32 .AND. ml_Move
         DO Move_Win with ln_Funckey, mn_PTWRow1, ;
         mn_PTWRow2, mn_PTWCol1, mn_PTWCol2
      OTHERWISE
         ?? chr(7)+chr(7)
         @ 12,0 say "   INVALID KEY!" color r*/w
         @ 13,0 say "     Re-Enter " color rg+/w
   ENDCASE
ENDDO
mn_FuncKey = -1 * ln_FuncKey + 1 + ;
int((ln_FuncKey)/10)*10
lc_FuncVal  = LTRIM(STR(mn_CalcAns,14,4))
lc_FuncVal  = TrimZero(lc_FuncVal)
DO CASE
   CASE ln_FuncKey < 0 .AND. ln_FuncKey > -10
      **     Function key was pressed.
      SET FUNC mn_FuncKey TO lc_FuncVal
   CASE ln_FuncKey < -9 .AND. ln_FuncKey > -20
      **    Ctrl-Function key was pressed.
      lc_funcstr = ;
      ltrim(trim(str(mn_funckey,2,0)))
      SET FUNCTION CTRL-F&lc_funcstr. ;
         TO lc_FuncVal
   CASE ln_FuncKey<-19 .AND. ln_FuncKey>-29
      **    Shift-Function key was pressed
      lc_funcstr = ;
      ltrim(trim(str(mn_funckey,2,0)))
      SET FUNCTION SHIFT-F&lc_funcstr. ;
         TO lc_FuncVal
ENDCASE
** Close the secondary window
DO PC_Clos2
RETURN

FUNCTION TrimZero
   PARAMETER lc_TrimZer
   **   Trim trailing zeros and decimal point.
   DO WHILE RIGHT(lc_TrimZer,1)$"0"
      ln_LenStr = LEN(lc_TrimZer) - 1
      lc_TrimZer = LEFT(lc_TrimZer,ln_LenStr)
   ENDDO
   ln_LenStr = LEN(lc_TrimZer) - 1
   lc_TrimZer = IIF(RIGHT(lc_TrimZer,1)=".",;
      LEFT(lc_TrimZer,ln_LenStr),lc_TrimZer)
RETURN (lc_TrimZer)
**    EOF TrimZero()

PROCEDURE PC_Open2
IF ml_Shadow
   DO EXPSHADO WITH mn_PTWRow1 , mn_PTWCol1,;
   mn_PTWRow2, mn_PTWCol2
   IF ml_Move
      DEFINE WINDOW ShadTape ;
      FROM mn_PTWRow1 + 1, mn_PTWCol1 + 2 ;
      TO mn_PTWRow2 + 1, mn_PTWCol2 + 2 ;
      PANEL color w/n,w/n,n/w
      ACTIVATE WINDOW ShadTape
   ENDIF
ENDIF
DEFINE WINDOW POPTAPE FROM mn_PTWRow1,mn_PTWCol1 ;
   TO mn_PTWRow2,mn_PTWCol2 DOUBLE color N/W,W/W,r/W
ACTIVATE WINDOW POPTAPE
RETURN

PROCEDURE PC_Clos2
RELEASE WINDOW PopTape
IF ll_Shadwin
   RELEASE WINDOW ShadTape
ENDIF
RETURN

PROCEDURE Move_Win
PARAMETERS ln_key, ln_WRow1, ln_WRow2, ln_WCol1,;
ln_WCol2
DO CASE
   CASE ln_key = 19
      **   Left Arrow, move the window left by 1.
      ln_MoveRow = 0
      ln_MoveCol = -1
   CASE ln_key = 1 .OR. ln_key = 5
      **    CTRL-LeftArrow / UP arrow.
      ln_MoveRow = -1
      ln_MoveCol = 0
   CASE ln_key = 4
      **    RightArrow, move the window right by 1.
      ln_MoveRow = 0
      ln_MoveCol = 1
   CASE ln_key = 6 .OR. ln_Key = 24
      **    CTRL-RightArrow /  DOWN arrow.
      ln_MoveRow = 1
      ln_MoveCol = 0
   CASE ln_key = 9 .OR. ln_key = 2
      **    Tab  /  End
      ln_MoveRow = 0
      ln_MoveCol = 79 - ln_WCol2 - ;
      IIF(ml_Shadow,2,0)
   CASE ln_key = -400 .OR. ln_key = 26
      **    Shift Tab  /  Home
      ln_MoveRow = 0
      ln_MoveCol = -ln_WCol1
   CASE ln_key = 18
      **    PgUp - move to TOP Row
      ln_MoveRow = -ln_WRow1
      ln_MoveCol = 0
   CASE ln_key=31
      **    Ctrl-PageUp
      **    Move window to top right of screen
      ln_MoveRow = -ln_WRow1
      ln_MoveCol = 79 - ln_WCol2 - ;
      IIF(ml_Shadow,2,0)
   CASE LASTKEY() = 3
      **    PgDown - move to BOTTOM Row
      ln_MoveRow = IIF(ll_PCStat,23,24) -ln_WRow2 -;
      IIF(ml_Shadow,1,0)
      ln_MoveCol = 0
   CASE ln_key=30
      **    Ctrl-PgDn
      **    Move window to bottom right of screen
      ln_MoveRow = IIF(ll_PCStat,23,24) - ln_WRow2-;
      IIF(ml_Shadow,1,0)
      ln_MoveCol = 79 -ln_WCol2 - IIF(ml_Shadow,2,0)
   CASE ln_key = 29
      **    Ctrl-Home - move to upper LEFT corner
      ln_MoveRow = -ln_WRow1
      ln_MoveCol = -ln_WCol1
   CASE ln_key = 23
      **    Ctrl-End - move to lower LEFT corner
      ln_MoveRow = IIF(ll_PCStat,23,24) - ln_WRow2-;
      IIF(ml_Shadow,1,0)
      ln_MoveCol = -ln_WCol1
   OTHERWISE
      RETURN
ENDCASE
IF ln_WRow1 + ln_MoveRow < 0 ;
   .OR. ln_WCol1 + ln_MoveCol < 0 .OR. ;
   ln_WRow2 +ln_MoveRow > IIF(ll_PCStat,23,24) - ;
   IIF(ml_Shadow,1,0) .OR. ;
   ln_WCol2 + ln_MoveCol > IIF(ml_Shadow,77,79)
   @ 0,0 SAY CHR(7) + CHR(7)
   RETURN
ENDIF
ln_WRow1 = ln_WRow1 + ln_MoveRow
ln_WCol1 = ln_WCol1 + ln_MoveCol
ln_WRow2 = ln_WRow2 + ln_MoveRow
ln_WCol2 = ln_WCol2 + ln_MoveCol
DO CASE
   CASE Window() = "POPCALC7"
      IF ml_Shadow
         MOVE WINDOW ShadCalc ;
         BY ln_MoveRow,ln_MoveCol
      ENDIF
      MOVE WINDOW PopCalc7 BY ln_MoveRow,ln_MoveCol
   CASE Window() = "POPTAPE"
      IF ml_Shadow
         MOVE WINDOW ShadTape ;
         BY ln_MoveRow,ln_MoveCol
      ENDIF
      MOVE WINDOW PopTape BY ln_MoveRow,ln_MoveCol
ENDCASE
RETURN

PROCEDURE PC_Param
PARAMETER ll_Test
**    Enable restting of PopCalc7 parameters.
**    (Tape_Size,Shadow,Move,Explode)
** NOTE: To get fancy, you might want to expand
**       on this code to enable resetting the
**       color settings.
DECLARE la_Param[4]
la_Param[1] = ml_Shadow
la_Param[2] = ml_Explode
la_Param[3] = ml_Move
la_Param[4] = str(mn_TapeSiz,3,0)
DEFINE WINDOW PC_PARAM from 4,23 to 13,52 ;
DOUBLE color N/W,W+/N,R/W
IF ml_shadow
   DO EXPSHADO with 4, 23, 13, 52
ENDIF
ACTIVATE WINDOW PC_Param
@ 0,4 say "Reconfigure PopCalc7" color n/w
@ 1,0 to 1,27 color n/w
@ 2,1 say "Shadows............. " + ;
IIF(la_Param[1],"Yes","No ") color n/w
@ 3,1 say "Exploding windows... " + ;
IIF(la_Param[2],"Yes","No ") color n/w
@ 4,1 say "Moving windows...... " + ;
IIF(la_Param[3],"Yes","No ") color n/w
@ 5,1 say "Tape size (20-580).. " + ;
la_Param[4] color n/w
@ 6,0 to 6,27 color n/w
@ 7,3 say "Press Esc when done..." color r/w
ln_x = 1
ln_ParKey = 0
DO WHILE .NOT. (ln_ParKey=23 .OR. ln_ParKey = 27)
   IF ln_X<>4
      @ ln_x+1,22 SAY ;
      IIF(la_Param[ln_x],"Yes","No ") color w/n

      ln_ParKey = INKEY(0)
      lc_ParKey = UPPER(CHR(ln_ParKey))
      ** Allow for space bar toggle. CHR(32)
      la_Param[ln_x] = iif(lc_ParKey=" ",;
      (.NOT.la_Param[ln_x]),la_Param[ln_x])
      la_Param[ln_x] = iif(lc_parKey$"YN",;
      (lc_ParKey="Y"),la_Param[ln_x])
      @ ln_x+1,22 SAY ;
      IIF(la_Param[ln_x],"Yes","No ") color n/w
   ELSE
      lc_PassNum = la_Param[ln_x]
      DO ParamNum with lc_PassNum
      la_Param[ln_x] = lc_PassNum
      @ ln_x+1,22 SAY la_Param[ln_x] color N/w
   ENDIF
   DO CASE
      CASE ln_ParKey = 28
         ** F1 - HELP
         DO CalcHelp with 2
      CASE ln_ParKey = 5 .OR. ln_ParKey = 19  ;
         .OR. ln_ParKey = 1 .OR. ln_ParKey = -400
         **    UpArrow or LeftArrow
         **    Ctrl-LeftArrow or Shift Tab
         ln_x = ln_x - 1
      CASE ln_ParKey = 26 .OR. ln_ParKey = 18 .OR. ;
         ln_ParKey = 29 .OR. ln_ParKey = 31
         **    Home or PgUp or Ctrl-Home or Ctrl-PgUp
         ln_x = 1
      CASE ln_ParKey = 2 .OR. ln_ParKey = 3 .OR. ;
         ln_ParKey = 30
         **    End or PgDn or Ctrl-PgDn
         ln_x = 4
      CASE ln_ParKey = 4 .OR. ln_ParKey = 24 .OR. ;
         ln_ParKey = 13 .OR. ln_ParKey = 6 .OR. ;
         ln_ParKey = 9
         **    DownArrow/RightArrow/Enter
         **    Ctrl-RightArrow/Tab
         ln_x = ln_x + 1
   ENDCASE
   ln_x = IIF(ln_x>4,1,IIF(ln_x<1,4,ln_x))
ENDDO
ll_test = (la_Param[1] # ml_Shadow)
ll_test = IIF(ll_Test,.t.,;
   (la_Param[2] # ml_Explode))
ll_test = IIF(ll_Test,.t.,;
   (la_Param[3] # ml_Move))
ll_test = IIF(ll_Test,.t.,;
   (VAL(la_Param[4]) # mn_TapeSiz))
lc_Choice = iif(ln_ParKey=23 .AND. ;
   ll_test,"Y",iif(ll_test,"M","N"))
IF lc_Choice="M"
   ** Maybe...
   ?? CHR(7)
   @ 7,3 say " Keep changes (Y/N)   " COLOR R/W
   lc_Choice = UPPER(CHR(INKEY(0)))
ENDIF
IF lc_choice="Y" 
   IF VAL(la_Param[4]) <> mn_TapeSize
      @ 7,3 say " Initializing tape...  "
      mn_TapeSiz = VAL(la_Param[4])
      DECLARE ma_Tape[mn_TapeSiz,2]
      DO TapeInit
   ENDIF
   ml_Shadow  = la_Param[1]
   ml_explode = la_Param[2]
   ml_move    = la_Param[3]
ELSE
   ll_Test = .f.
ENDIF
RELEASE WINDOW PC_PARAM
RETURN

PROCEDURE ParamNum
PARAMETER lc_ParNum
@ 7,3 say "(+) (-) (Enter=Accept)" color r/w
DO WHILE .t.
   @ 5,22 SAY lc_ParNum color W/N
   ln_ParKey = inkey(0)
   lc_PKeyStr = UPPER(CHR(ln_ParKey))
   DO CASE
      CASE ln_ParKey = 27
         **    Escape has been pressed.
         **    Reset tape size to old size
         **    and exit.
         lc_ParNum = str(mn_TapeSiz,3,0)
         @ 5,22 SAY lc_ParNum color W/N
         EXIT
      CASE ln_ParKey = 28
         ** F1 - HELP
         DO CalcHelp WITH 2
      CASE ln_ParKey <32
         **    Enter or any other "navigation"
         **    key has been pressed.
         EXIT
      CASE lc_PKeyStr = "+"
         **    Upper array limit = 585
         **    But, to keep to clean, limit to 580
         IF lc_ParNum<="570"
            lc_ParNum = str(val(lc_parnum)+10,3,0)
         ELSE
            ?? chr(7)
         ENDIF
      CASE lc_PKeyStr = "-"
         **    Prevent tape from being to small.
         **    Too much time wasted in continually
         **    re-initializing a very small tape.
         IF lc_ParNum>=" 30"
            lc_ParNum = str(val(lc_parnum)-10,3,0)
         ELSE
            ?? chr(7)
         ENDIF
   ENDCASE
ENDDO
** Prevent escaping from PROCEDURE PC_Param loop.
ln_ParKey = iif(ln_ParKey=27,4,ln_ParKey)
@ 7,3 say "Press Esc when done..." color r/w
RETURN

PROCEDURE CalcHelp
PARAMETER ln_HelpScr
** Simple help text...
SAVE SCREEN TO CalcHelp
ACTIVATE SCREEN
IF ml_shadow
   DEFINE WINDOW ShadHelp FROM 2,6 TO 23,76 ;
   color w/n,w/n,n/w panel
   ACTIVATE WINDOW ShadHelp
ENDIF
DEFINE WINDOW CalcHelp from 1,4 to 22,74 color N/bg,,W+/bg
ACTIVATE WINDOW CalcHelp
DO WHILE ln_HelpScr <=6
   CLEAR
   DO CASE
      CASE ln_HelpScr = 1
         TEXT
 Operations                                            PopCalc7 Help
อออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออ
               Welcome to PopCalc7's HELP Facility            
อออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออ

 PopCalc7 operates much the same as most other calculators.

 You can add, subtract, multiply, divide, and exponentiate 
 both with "keyed" entries and values held in "memory".

 To Exit PopCalc7, or any associated windows, press <Esc>.

 You also have the ability to view and print the current "tape", 
 assign a value to a "paste" key, perform an immediate paste,  
 move the windows,  and you may re-configure PopCalc7's display 
 characteristics and tape size.

 To EXIT this help system at any point, press <Esc>.

                              More....                        Page 1
         ENDTEXT
      CASE ln_HelpScr = 2
         TEXT
 Configuration                                         PopCalc7 Help
อออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออ

 You may "re-configure" PopCalc7 by pressing "R" from within in the
 main calculator.  You may enable/disable the following:

               Shadows for all windows.   (YES/no)
               Exploding windows.         (YES/no)
               Moving windows.            (YES/no)

           <Press "Y", "N" , or the space bar to toggle>

 You may change the "Tape size" within the range 20 to 580.  
 CAUTION: Changing the tape size will reset the current tape.

 To change the tape size, press:   +  Increases.
                                   -  Decreases.


                              More....                        Page 2
         ENDTEXT
      CASE ln_HelpScr = 3
         TEXT
 Configuration (continued)                             PopCalc7 Help
อออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออ

 If both "moving windows" and "shadowing" are enabled, shadows
 will be opaque. Otherwise, transparent shadowing is in effect. 

 "Exploding windows" effects only the main calculator window.

 When "shadowing" is enabled, all shadowing will be of an 
 "explosive" variety.

 With "exploding windows" and "shadowing", the calculator shadow
 and window explode from the center.  If "shadowing" and not 
 "exploding", the shadow will explode from upper left to lower  
 right for the calculator window.

 All shadowing for other windows is exploded from upper left to 
 lower right.

                              More....                        Page 3
         ENDTEXT
      CASE ln_HelpScr = 4
         TEXT
        Key Press   Calc & Paste   Tape Window    Tape Display
      ฤฤฤฤฤฤฤฤฤฤฤฤ   ฤฤฤฤฤฤฤฤฤฤฤ   ฤฤฤฤฤฤฤฤฤฤฤ   ฤฤฤฤฤฤฤฤฤฤฤฤฤฤฤ
         UpArrow         Up            n/a         Up One Line
         DnArrow        Down           n/a        Down One Line
      Ctrl-RtArrow       Up            Up              n/a
      Ctrl-LtArrow      Down          Down             n/a
         LtArrow        Left          Left             n/a
         RtArrow        Right         Right            n/a
           Tab        Far Right     Far Right          n/a
           End        Far Right        n/a         End of Tape
         Shift-Tab    Far Left      Far Left           n/a
           Home       Far Left         n/a         Top of Tape
           PgUp          Top           n/a        Back 10 Lines
           PgDn         Bottom         n/a        Down 10 Lines
        Ctrl-PgUp     Upper Right   Upper Right        n/a
        Ctrl-PgDn     Lower Right   Lower Right        n/a
        Ctrl-Home     Upper Left    Upper Left         n/a
        Ctrl-End      Lower Left    Lower Left         n/a
      ฤฤฤฤฤฤฤฤฤฤฤฤ   ฤฤฤฤฤฤฤฤฤฤฤ   ฤฤฤฤฤฤฤฤฤฤฤ   ฤฤฤฤฤฤฤฤฤฤฤฤฤฤฤ
                              More....                        Page 4
         ENDTEXT
      CASE ln_HelpScr = 5
          ** NOTE TO PROGRAMERS: 
          **   You should adjust this help screen to
          **   reflect keys applicable to your code.
         TEXT
 PASTE KEYS                                            PopCalc7 Help
อออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออ

 Press "P" while in the main calculator to enable the paste function.

 A paste key will allow you to use place the calculated answer 
 into a data entry field.  A window will appear and prompt you
 to press a key which is to be used as the paste key:   

                        F2  thru  F10  
                  Shift-F1  thru  Shift-F9
                   Ctrl-F1  thru  Ctrl-F10

 Once you have returned to your application, a press of the paste
 key will then enter the stored number into your data entry field.

 NOTE: Pressing "I" from within calculator screen will immediately 
       exit PopCalc7 and paste the answer to the current field.

                              More....                        Page 5
         ENDTEXT
      CASE ln_HelpScr = 6
         TEXT
 TAPE                                                  PopCalc7 Help
อออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออ

 Pressing "T" in the main calculator window will open a "tape" of
 your calculator activity.

 The last entries will be shown initially.  If there are more than 
 ten (10) entries, "More" will be indicated on the top line. You 
 may scroll through the tape by pressing the appropriate keys as
 detailed proviously in this help session.

 While in the tape window:

    Press "P" to print the tape to an attached printer.

    Press "C" to clear the tape.
 
    Press "Esc" to return to the calculator window.

                            -*- END -*-                       Page 6
         ENDTEXT
   ENDCASE 
   ln_HelpKey = INKEY(0)
   DO CASE
      CASE ln_HelpKey = 5 .OR. ln_HelpKey = 19  ;
         .OR. ln_HelpKey = 18 .OR. ln_HelpKey =1;
         .OR. ln_HelpKey = -400
         **    UpArrow or LeftArrow or PgUp 
         **    Ctrl-LeftArrow or Shift Tab
         ln_HelpScr = ln_HelpScr - 1
      CASE ln_HelpKey = 26 .OR. ;
         ln_HelpKey = 29 .OR. ln_HelpKey = 31
         **    Home or Ctrl-Home or Ctrl-PgUp
         ln_HelpScr = 1
      CASE ln_HelpKey = 2 .OR. ln_HelpKey = 30 
         **    End or Ctrl-PgDn
         ln_HelpScr = 6
      CASE ln_HelpKey = 27 .OR. ln_HelpKey = 23
         ** Escape or Ctrl-End
         EXIT
      OTHERWISE
         ln_HelpScr = ln_HelpScr + 1
   ENDCASE
   IF ln_HelpScr>6 .or. ln_HelpScr<1
      ?? CHR(7)
   ENDIF
   ln_HelpScr = IIF(ln_HelpScr>6,6,iif(ln_HelpScr<1,1,ln_HelpScr))
ENDDO
RELEASE WINDOW CalcHelp
IF ml_shadow
   RELEASE WINDOW ShadHelp
ENDIF
RESTORE SCREEN FROM CalcHelp
RELEASE SCREEN CalcHelp
RETURN