If  you are new to LAN-LINK, don't be scared off by the  size  of 
        the  program  and the manual.  LAN-LINK is built in  a  top  down 
        structured manner.  You can go into it as deep as you need. Begin 
        by  using the QUICK MENU which gives you the most  commonly  used 
        features in one menu. Then, as you become familiar with LAN-LINK, 
        start to explore the other menus.

        Before you operate for the first time, bring up LAN-LINK and  use 
        the  options in the Parameter Menu to configure LAN-LINK to  your 
        station  and  way  of  operating.   AS  A  MINIMUM,  CHANGE   THE 
        CALLSIGNS.  Read SECTION 2 first and then later Section 18 of the 
        documentation to see what the customization  is capable of. 
        Update/Save the configuration file when finished.

        LAN-LINK  uses HARDWARE Handshaking between the PC and  the  TNC, 
        you  must  have  the cable wired correctly. A  cable  with  three 
        signal wires will not work correctly.  If you insist on using a 3 
        wire cable, you must set the DCD Flag (in the Parameter Menu)  to 
        OFF.

        LAN-LINK FILES 

        LAN-LINK.EXE The program, run it. 
        LAN-LINK.DOC The Documentation file.
        KAM.SYS      Configuration file for KAM.
        KPC.SYS      Configuration file for KPC-2.
        LAN-LINK.SYS Configuration file (default )for PK232.
        MFJ1278.SYS  Configuration file for MFJ1278.
        TNC1.SYS     Configuration file for TNC1.
        TNC2.SYS     Configuration file for TNC2.
        YAPP CNF     Configuration file for YAPP (use in YAPP).
        APPNOTES.001 LAN-LINK Application Note on Working SAREX
        APPNOTES.002 LAN-LINK Application Note on Connecting to others
        APPNOTES.003 LAN-LINK Application Note on Flow Control
        BEGINNER.BBS Reprint of an article describing the features on, and
                     how to use a packet BBS.
        PCZ.ZIP      Zipped Public Domain Zmodem protocols for use with the
                     QZ*.BAT files.
        QZ*.BAT      Batch files which LAN-LINK will use for Zmodem Binary
                     File transfers.

        If you don't have a PK232, rename LAN-LINK.SYS to PK232.SYS, then 
        rename your TNC.SYS file to LAN-LINK.SYS and configure it.

        For example, if you are using a KAM,
           rename LAN-LINK.SYS to PK232.SYS, then
           rename KAM.SYS to LAN-LINK.SYS.

        LAN-LINK   will  run  unconfigured,  but  please  configure   the 
        callsigns at least.

        Print  or view the documenation file to find out more about  LAN-
        LINK.

        READ THE DOCUMENTATION FILE.

        Update Notes

        If you are UPDATING from an earlier than 1.58 version of LAN-LINK
        or any PK232COM,  the Configuration files are  not compatible  to 
        that  needed  for 1.58. You must use  the  Configuration  file(s) 
        supplied on this disk.  
         
        If  you are updgrading  from  1.58,  you can use  your old config-
        uration file,  ignore the error  message when  you bring it up for
        the first time, and Update the file (Parameter menu, U option).

        LAN-LINK 1.59 Registration Fee $35.00 
        PC-HAM   3.52 Registration Fee $36.50 
        WHATS-UP 1.00 Registration Fee $35.00

        Special  discount, $95.00 if all packages are registered  at  the 
        same time.

        Evaluation Copies $5.00 per package, $10.00 for the set.

          To: Joe Kasser G3ZCZ
            P O BOX 3419
            SILVER SPRING
            MD 20918.

          CALL ________________ TODAY'S DATE _____________

          NAME ______________________________________________

          ADDRESS ___________________________________________

            ___________________________________________

          CITY ___________________________Telephone (___)____-____

          STATE _________ POSTCODE ______________________

          TNC TYPE _____________________ Home BBS __________

        I  enclose a check for ______. Please send me the latest  version 
        of  ______________,  and register me as a user.  I  am  currently 
        using version _____ which I obtained from _____________________.

        I  enclose  a  disks/sase or $5.00. ($10.00  for  all  programs). 
        Please  send me the latest version of  ______________________  to 
        evaluate. If I like it and use it, I plan to become a  registered 
        user.

        Disk Size 5.25 ______ 3.5 ______

          Signature

















                                   3