EN   :T "#)&(u#+-RT./2.]306R7v:u<r]?.@@C+FIXXJULtN RTfV{WoPYMZN[K6]u_,`acyd}egmihjwLlq>v0yz}_ނh$Tx$67mfd$8\G}Yl TOP OF FILE Keystroke sequence:  Alternate keystrokes: The cursor is moved to the first character in the file. BOTTOM OF FILE Keystroke sequence:  Alternate keystrokes: The cursor is moved past the last character in the file. GO TO LINE NUMBER Keystroke sequence:  Alternate keystrokes: The cursor will be repositioned to the specified line numberof the current window. A prompt box will request the targetline number. Enter any number from 1 to 32767. If the valueis preceded by a plus (+) or minus (-) sign, the target linenumber will be calculated relative to the current line. GO TO COLUMN NUMBER Keystroke sequence:  Alternate keystrokes: The cursor will be repositioned to the specified columnnumber of the current line. A prompt box will request thetarget column number. Enter any number from 1 to 999. If thevalue is preceded by a plus (+) or minus (-) sign, thetarget column number will be calculated relative to thecurrent column. GO TO WINDOW Keystroke sequence:  Alternate keystrokes: (None)The cursor will be moved to the current position in anotherwindow on the screen. If only one window is available,nothing will happen. Otherwise a menu will appear, showingthe available windows, and the files currently in each one.Select one of these choices by moving the selection bar orby pressing the number of the desired window. UNDO LAST DELETION Keystroke sequence:  Alternate keystrokes: (None)The line of text most recently deleted will be inserted intothe current text stream at the cursor position. Note thatthis applies only to complete lines of text, and not tocharacter or word deletions. By default, 20 lines of deletedtext are stored for possible undeletion. The undo limit canbe adjusted via a Setup command. RESTORE LINE Keystroke sequence:  Alternate keystrokes: (None)The current line of text will be restored to its appearancejust prior to when the cursor was moved onto the line. Thecursor position will also be restored to the value when itentered the line. SEARCH FOR PATTERN Keystroke sequence:  Alternate keystrokes: The current window will be searched to find a specifiedsequence of text. When the pattern is found, the cursor willbe positioned at the beginning of the pattern, and thematched text highlighted until the next keystroke.A prompt box will allow entry of the text pattern and searchoptions. Enter any text or control characters just as theywould be typed in the body of the file. Search options control the behavior of the search. Thefollowing options are available: U - ignore case (Upper-case) while searching B - search Backwards from the cursor position. W - search for whole Words only. G - search Globally, starting at the beginning of the file (or end, if searching backwards). L - search Locally (only within marked block). n - search for the nth occurrence of the string (n is an integer). Enter the following sequence of keystrokes to search for theend of each text line: . Thissequence enters Carriage return/Line feed into the searchpattern.Note that each pattern must be found within a single line.No match may span multiple lines. SEARCH AND REPLACE Keystroke sequence:  Alternate keystrokes: The current window will be searched for a specified sequenceof text. When the pattern is found, it will be replaced withanother specified text sequence.A prompt box will allow entry of the search text,replacement text, and search options. Enter any text orcontrol characters just as they would be typed in the bodyof the file. Search options control the behavior of the search. Thefollowing options are available: U - ignore case (Upper-case) while searching B - search Backwards from the cursor position. W - search for whole Words only. G - search Globally, starting at the extreme end of the file. L - search Locally (only within marked block). N - do Not prompt for confirmation when the pattern is found. n - replace n occurrences of the string (n is an integer). If the N option is not specified, a prompt will occur eachtime the search pattern is found. This prompt will providethe following options: Y - replace this text and continue searching. N - do Not replace, but continue searching. A - replace this text and replace All others without prompting. Q - do not replace, and Quit searching. Enter the following sequence of keystrokes to search for theend of each text line: . Thissequence enters Carriage return/Line feed into the searchpattern. SEARCH AND USE MACRO Keystroke sequence:  Alternate keystrokes: (None)The current window will be searched for a specified sequenceof text. When the pattern is found, the cursor will berepositioned to that location, and a specified macro will beplayed back. A prompt box will allow entry of the search text, macroselection, and search options. Enter any text or controlcharacters just as they would be typed in the body of thefile. The macro must have been defined prior to using thesearch and apply macro command. Search options control the behavior of the search. Thefollowing options are available: U - ignore case (Upper-case) while searching B - search Backwards from the cursor position. W - search for whole Words only. G - search Globally, starting at the extreme end of the file. L - search Locally (only within marked block). N - do Not prompt for confirmation when the pattern is found. n - apply macro for n occurrences of the search string (n is an integer). If the N option is not specified, a prompt will occur eachtime the search pattern is found. This prompt will providethe following options: Y - apply macro and continue searching. N - do Not apply macro, but continue searching. A - apply macro and apply at All matches without prompting. Q - do not apply macro, and Quit searching. Enter the following sequence of keystrokes to search for theend of each text line: . Thissequence enters Carriage return/Line feed into the searchpattern. SEARCH AGAIN Keystroke sequence:  Alternate keystrokes: The previous search operation will be repeated. This willrepeat a plain search, a search and replace, or a search andapply macro command. Exit to DOS Keystroke sequence:  Alternate keystrokes: (None)Any DOS command or program may be executed. A prompt boxwill ask for the name of the command or program to run.Entering an empty line at the prompt box will cause a DOSshell to be invoked. You may execute any sequence of DOScommands from the shell, and finally return to the editor bytyping Exit. The DOS shell requires that a copy of COMMAND.COM be presentin the normal drive and directory assigned by DOS.Sufficient random-access memory must be available for theshell and any command that you specify.Do not execute any program that becomes memory residentwhile within the DOS shell. BACKWARD TAB Keystroke sequence:  Alternate keystrokes: (None)The cursor will be moved to the next tab left of the currentposition. This command is available only in fixed tab mode. EDIT ANOTHER FILE Keystroke sequence:  Alternate keystrokes: (None)The current window will be cleared, and a prompt box willask for the name of another file to edit. If the currentwindow already holds a file that has been modified, you willbe given the opportunity to save it. When prompted for a file name, you may enter DOS wildcardsor the name of another drive or subdirectory. In this case,another window will display the names of all matching files.You can select from this list by using the cursor keypad, orby pressing the first letter of the filename in which youare interested.By entering an empty line for the file name, you can edit afile without specifying a name for it. A name can bespecified later when you want to write it out to disk. FILE QUIT Keystroke sequence:  Alternate keystrokes: (None)The editing session will end and you will return to DOS. Ifany windows have been modified, prompt boxes will appear andyou will be given the opportunity to save each modifiedfile. If you type  at any of the prompt boxes, theFILE QUIT command will be interrupted and you will return tothe current text window. READ BLOCK FROM FILE Keystroke sequence:  Alternate keystrokes: (None)A prompt box will ask for the name of a file to read. Thisfile will be read into the current window, starting at thecurrent cursor position. The newly read text will be markedas a block. When prompted for a file name, you may enter DOS wildcardsor the name of another drive or subdirectory. In this case,another window will display the names of all matching files.You can select from this list by using the cursor keypad, orby pressing the first letter of the filename in which youare interested. SAVE AND CONTINUE EDIT Keystroke sequence:  Alternate keystrokes: The contents of the current window will be saved to disk,using a file name the same as when the file was first read.If the file has not been named, a prompt box will ask for anew name. If the disk file already exists, a backup copywill be made before overwriting the existing version. Thecursor will remain in place after the file is written todisk. WRITE BLOCK TO FILE Keystroke sequence:  Alternate keystrokes: (None)The currently marked block will be written to a disk file.If no block is marked, an error message will be produced. Ifthe disk file already exists, you will be given the choiceof overwriting it or appending to it. OPEN WINDOW Keystroke sequence:  Alternate keystrokes: A prompt box will ask for the name of a new file to read. Ifanother file is already being edited, the current windowwill be split in half, and the new file will be read intothe new window.By specifying a file name that matches an existing window,you may look at two regions of the same file. Changes madein one window will affect all other windows which containthe same file. When prompted for a file name, you may enter DOS wildcardsor the name of another drive or subdirectory. In this case,another window will display the names of all matching files.You can select from this list by using the cursor keypad, orby pressing the first letter of the filename in which youare interested.By entering an empty line for the file name, you can edit afile without specifying a name for it. A name can bespecified later when you want to write it out to disk. RESIZE WINDOW Keystroke sequence:  Alternate keystrokes: Use this command to change the height of the current window.The up and down arrow keys will move the window dividinglines. Press  when the window has the desired size. SAVE/SWITCH FILES Keystroke sequence:  Alternate keystrokes: (None)The file in the current window will be stored to disk. Aprompt box will then ask for the name of another file toedit. The new file will be read into the current window. Allwindow sizes will remain the same. When prompted for a file name, you may enter DOS wildcardsor the name of another drive or subdirectory. In this case,another window will display the names of all matching files.You can select from this list by using the cursor keypad, orby pressing the first letter of the filename in which youare interested.By entering an empty line for the file name, you can edit afile without specifying a name for it. A name can bespecified later when you want to write it out to disk. NEXT WINDOW Keystroke sequence:  Alternate keystrokes: The cursor will be moved to the current position in the nextwindow down on the screen. If the cursor is already in thelowest window, it will move to the topmost window. If thereis only one window, nothing will happen. ZOOM WINDOW Keystroke sequence:  Alternate keystrokes: The current window will grow to fill the screen. Other textwindows are kept in memory, but are not visible until zoomis toggled off. The Next window and Previous window commandswill bring each window to the forefront in succession. Textmarkers and blocks may be accessed as usual in the hiddenwindows. The only exception is block delete: a block willnot be deleted from a hidden window. When zoom is active, a letter Z will appear at the left edgeof the window status line. Toggling the zoom command againwill make all windows visible. BLOCK BEGIN Keystroke sequence:  Alternate keystrokes: The cursor position will become the start of a marked block.There are two modes of marking a block. The first is thenormal mode in which full lines are marked for moving,copying or deleting. The second will cause only a group ofcolumns to be marked. This mode is active only when the word`Column' replaces the percent full in the status line.Column mode will allow the moving, copying or deleting ofthe marked column only. To Activate Column Mode:  Alternate:  BLOCK END Keystroke sequence:  Alternate keystrokes: The cursor position will become the end of a marked block.There are two modes of marking a block. The first is thenormal mode in which full lines are marked for moving,copying or deleting. The second will cause only a group ofcolumns to be marked. This mode is active only when the word`Column' replaces the percent full in the status line.Column mode will allow the moving, copying or deleting ofthe marked column only. To Activate Column Mode:  Alternate:  START OF BLOCK Keystroke sequence:  Alternate keystrokes: (None)The cursor will be moved to the start of the current block,whether it is visible or not. END OF BLOCK Keystroke sequence:  Alternate keystrokes: (None)The cursor will be moved to the end of the marked block,whether it is visible or not. BLOCK COPY Keystroke sequence:  Alternate keystrokes: A copy of the marked block will be inserted at the currentcursor position.There are two modes of marking a block. The first is thenormal mode in which full lines are marked for moving,copying or deleting. The second will cause only a group ofcolumns to be marked. This mode is active only when the word`Column' replaces the percent full in the status line.Column mode will allow the moving, copying or deleting of the marked column only.To Activate Column Mode:  Alternate:  BLOCK MOVE Keystroke sequence:  Alternate keystrokes: The marked block will be removed from its current locationand inserted at the current cursor position.There are two modes of marking a block. The first is thenormal mode in which full lines are marked for moving,copying or deleting. The second will cause only a group ofcolumns to be marked. This mode is active only when the word`Column' replaces the percent full in the status line.Column mode will allow the moving, copying or deleting of the marked column only.To Activate Column Mode:  Alternate:  BLOCK DELETE Keystroke sequence:  Alternate keystrokes: (None)The marked block will be deleted from the text stream. Ifthe block spans more than one line, the deleted lines may berecovered via the Undelete command.There are two modes of marking a block. The first is thenormal mode in which full lines are marked for moving,copying or deleting. The second will cause only a group ofcolumns to be marked. This mode is active only when the word`Column' replaces the percent full in the status line. Column mode will allow the moving, copying or deleting ofthe marked column only.To Activate Column Mode:  Alternate:  HIDE BLOCK Keystroke sequence:  Alternate keystrokes: (None)The on-screen highlighting of the marked block is toggled onor off. Blocks can be copied, moved, or deleted only whenthe block is visibly marked. Movement to block start or endis possible even when the block is not visible. LOAD MACROS FROM DISK Keystroke sequence: (None) Alternate keystrokes: (None)A previously stored file of Editor keyboard macros is loadedinto memory. The macro file is a binary file in a specialformat used by the Editor. Macros may be recorded, edited,and stored to disk from within the Editor. Each macro filecontains ten macros, each of which may hold up to 255keystrokes. The Editor automatically loads the macro fileHED.MAC, if found, when the program is started. STORE MACROS TO DISK Keystroke sequence: (None) Alternate keystrokes: (None)The current set of Editor keyboard macros is written to adisk file. A prompt box will ask for a file name. The macrofile is a binary file in a special format used by theEditor. Macros may be recorded, edited, and stored to diskfrom within the Editor. Each macro file contains ten macros,each of which may hold up to 255 keystrokes. the Editorautomatically loads the macro file HED.MAC, if found, whenthe program is started. TOGGLE MACRO RECORD Keystroke sequence:  Alternate keystrokes: Any keystrokes entered after this command is activated arestored within a keyboard macro, which may be edited andlater played back within the Editor. To stop macrorecording, enter this command a second time. A prompt boxwill ask for which of the ten macros should store the newlyrecorded one, and for a descriptive name for the macro.Each macro can hold up to 255 keystrokes. Macros can playback other macros. Macros are played back by pressing one of the installed keystroke combinations, or by choosing theMacro Playback option from the menu system. One of the macros is somewhat special. This macro is calledthe "scrap". Whenever a new macro is recorded, it writesover the scrap macro. The current scrap macro can be playedback once or many times using other macro commands. GET INFORMATION Keystroke sequence:  Alternate keystrokes: (None)Various facts about the Editor and the current file aredisplayed. Information shown includes the complete path nameof the current file; its size in bytes, words, lines, andpages; whether it has been modified since last disk save;the time and date; available RAM and disk space; the currentdirectory; and the DOS and the Editor version numbers.Some of the statistics that the Editor presents take a whileto compute. By pressing any key while the Get Info window is being updated, you can "short-circuit" the computation ofsome items. TOGGLE INSERT MODE Keystroke sequence:  Alternate keystrokes: When insert mode is active, newly typed text is insertedinto the current text line, pushing characters to the rightof the cursor aside to make room. When insert mode is off,newly typed text overwrites existing text. Many commands,such as block copy and insert line, operate in insert modeindependent of the setting of this toggle. TOGGLE AUTOINDENT MODE Keystroke sequence:  Alternate keystrokes: (None)When autoindent mode is active and the  key ispressed, the new line of text will be indented the samenumber of spaces as the line immediately above it. Thesetting of this toggle also affects the operation of theparagraph reformatting command. TOGGLE CASE Keystroke sequence:  Alternate keystrokes: (None)The case of the character at the cursor location will betoggled from upper to lower, or from lower to upper. If ablock is marked and visible, and the cursor is anywherewithin the marked block, the command will toggle the case ofthe entire block. LOWER CASE Keystroke sequence:  Alternate keystrokes: (None)The case of the character at the cursor location will be setto lower-case. If a block is marked and visible, and thecursor is anywhere within the marked block, the command willchange the case of the entire block. UPPER CASE Keystroke sequence:  Alternate keystrokes: (None)The case of the character at the cursor location will be setto upper-case. If a block is marked and visible, and thecursor is somewhere within the marked block, the commandwill change the case of the entire block. INSERT UNDO BUFFER Keystroke sequence:  Alternate keystrokes: (None)The entire contents of the undo buffer are inserted into thecurrent text stream, prior to the current line. This emptiesthe undo buffer, that is, the operation can be used onlyonce for any set of deletions. SET COLORS Keystroke sequence: (None) Alternate keystrokes: (None)All of the editor colors can be customized to your liking.Independent color settings are available for normal text,block marked text, window status lines, the prompt line atthe top of the screen, text in menus and prompt boxes, menuframes, the highlighted character by which each menu itemmay be selected, the currently selected menu item, the blockcursor (when active), and each of the five selectable fonts. The colors that you select are saved with the Editor whenyou execute the Options Save setup command. SAVE SETUP Keystroke sequence: (None) Alternate keystrokes: (None)The toggles, settings, colors, and options are stored as theEditor defaults when this command is executed. HED.EXE mustbe present in the default directory or in the installed homedirectory. FLUSH UNDO BUFFER Keystroke sequence:  Alternate keystrokes: (None)The contents of the undo buffer will be deleted, freeing upwhatever memory is being used. This command is useful incombination with the Insert Undo Buffer command. CHANGE DIRECTORY Keystroke sequence:  Alternate keystrokes: (None)The current default drive or directory may be changed usingthis command. Entering wildcards will cause a directorywindow to appear showing possible choices.Files previously opened in other directories will beproperly accessed even after the active directory ischanged. DIRECTORY Keystroke sequence: (None) Alternate keystrokes: (None)Use this command to browse through a file directory. Usestandard DOS pathname and wildcard notation to specify afile mask for the directory. SET UNDO LIMIT Keystroke sequence: (None) Alternate keystrokes: (None)This specifies the maximum number of lines of deleted textthat will be stored in the Undo buffer. If Undo limit is 10,and you delete 15 lines, the first five lines deleted willbe lost. Whenever lines are Undeleted, that space isrecovered for the undo buffer to reuse. TOGGLE TAB EXPANSION Keystroke sequence: (None) Alternate keystrokes: (None)When tab expansion is ON, any tabs encountered upon read-inof a file are expanded into spaces, using a tab spacing thatyou specify. If tab expansion is OFF, the Editor leaves thetabs intact. However, the Editor does not expand tabs as itdisplays them, so these will be displayed on the screen asI. SET FILE EXTENSION Keystroke sequence: (None) Alternate keystrokes: (None)If you edit many files with the same extension, such as.DOC, you should enter that value for the default extension.The Editor will automatically supply the default extensionwhenever you respond to a filename prompt without enteringan extension. The extension you enter should not include aperiod or any DOS wildcards, and is limited to threecharacters. SET TAB SIZE Keystroke sequence: (None) Alternate keystrokes: (None)By default, a tab is placed after every eight columns oftext. This tab size is also used when files containing tabsare read into the Editor. Change the tab size and use theRestore even command to initialize a different set ofregularly spaced tabs. WINDOW CLOSE Keystroke sequence:  Alternate keystrokes: (None)The current text window will be cleared. If it has beenmodified since being saved to disk, you will be given theopportunity to save it. The window will then be closed. Ifthe window is the only one on the screen, you will return tothe the Editor menu system. SET MARKERThis command stores a record of the current cursor positionto which you can easily return later. The Editor supports upto ten text markers, which are labeled with the numbers 0-9when they are placed in the text. Shortcut commands forusing each of the ten markers are presented on a followingscreen.The text marker display writes over the character where itis placed. It does not affect the actual text, but merelyhides it. When a marker is set from the menu system, another menu willappear showing which markers are already in use. Redefiningan existing marker erases the previously stored position.Defining a marker at the same position where it is currentlylocated has the effect of erasing it.The following screen provides shortcut keystrokes forsetting text markers without using menus. The following commands will set any of the markers withoutusing a menu.Marker 0 Main: 0 Alternate: (None)Marker 1 Main: 1 Alternate: (None)Marker 2 Main: 2 Alternate: (None)Marker 3 Main: 3 Alternate: (None)Marker 4 Main: 4 Alternate: (None)Marker 5 Main: 5 Alternate: (None)Marker 6 Main: 6 Alternate: (None)Marker 7 Main: 7 Alternate: (None)Marker 8 Main: 8 Alternate: (None)Marker 9 Main: 9 Alternate: (None) JUMP TO MARKERThis command moves the cursor to the position of apreviously stored text marker. If the marker has not beenset, an error will occur. The Editor supports up to ten textmarkers, which are labeled with the numbers 0-9 when theyare placed in the text.When you jump to a marker from the menu system, another menuwill appear showing which markers have previously been set.The following screen provides shortcut keystrokes forjumping to text markers without using menus. The following commands will jump to any of the markerswithout using a menu.Marker 0 Main: 0 Alternate: (None)Marker 1 Main: 1 Alternate: (None)Marker 2 Main: 2 Alternate: (None)Marker 3 Main: 3 Alternate: (None)Marker 4 Main: 5 Alternate: (None)Marker 5 Main: 5 Alternate: (None)Marker 6 Main: 6 Alternate: (None)Marker 7 Main: 7 Alternate: (None)Marker 8 Main: 8 Alternate: (None)Marker 9 Main: 9 Alternate: (None) PLAYBACK MACROThis command will play back a previously recorded macro. Amenu showing the name of all macros will appear; you shouldchoose the one desired.The following screen gives shortcut commands which allow youto playback macros without using the menu system. The following commands will playback a macro without usingthe menu system:Macro 1 Main:  Alternate: (None)Macro 2 Main:  Alternate: (None)Macro 3 Main:  Alternate: (None)Macro 4 Main:  Alternate: (None)Macro 5 Main:  Alternate: (None)Macro 6 Main:  Alternate: (None)Macro 7 Main:  Alternate: (None)Macro 8 Main:  Alternate: (None)Macro 9 Main:  Alternate: (None) TOGGLE FIXED TABS Keystroke sequence:  Alternate keystrokes: (None)When fixed tabs are ON, tab positions are taken from a tableof columns that you can set to even spacing or customizethrough various tab commands. When fixed tabs are OFF, tabpositions are based on the contents of the text surroundingthe current line, just like the Turbo Pascal editor. SET HOME DIRECTORY Keystroke sequence: (None) Alternate keystrokes: (None)The Editor uses several files in its operation. Thesecontain the current printer definition, default macros, andthis help file. In order to run the Editor from a drive ordirectory other than where these files are located, you willneed to set up a Home Directory. The home directoryspecifies the location of the optional Editor support fileson your system. The following files should be kept in that directory: HED.HLP HED.MACThe Editor will operate without the use of these files, butin that case certain program features will not be available.After the home directory is set, it can be saved with theEditor's Save Setup command. TOGGLE HIGH-BIT STRIP Keystroke sequence: (None) Alternate keystrokes: (None)When High-bit strip is ON, the most significant bit of eachcharacter read from the disk will be set to zero. This isuseful when reading in files previously generated inWordStar document mode. Note that stripping the high bitwill also affect any usage of the IBM extended ASCIIcharacter set, such as the line drawing characters. EDIT MACRO Keystroke sequence: (None) Alternate keystrokes: (None)Macros recorded within the Editor can be edited on acharacter by character basis using the built-in macroeditor.First, a prompt box will ask for a new name for the macro,which you can accept as is, or change. The macro will appear in another window. It can be editedusing the cursor keys, and the  or keys. Most characters you type will be inserted literallyinto the macro.  will delete the macro. will end the session in the macro editor. will undo any changes made to the macro. In case you need toenter any of these special keys as part of the macro, pressthe  key to enter Literal mode. In this mode,all keystrokes will be inserted into the macro without anyinterpretation. SAVE AS Keystroke sequence:  Alternate keystrokes: (None)This command will store all text in the current window toany file that you name. When you are editing in a windowthat has not previously been named, you can use this commandto assign a name to the window. Using it in an already-namedwindow will cause the name of that window, and all otherwindows sharing the same text stream, to be updated to thenew name. TOGGLE KEY HELP Keystroke sequence:  Alternate keystrokes: (None)When Key Help is ON, the Editor will display the commandsequences that correspond to each menu selection while youare browsing through the menu system. This can serve tofamiliarize you with the quick keystrokes and speed up yourediting. PREVIOUS WINDOW Keystroke sequence:  Alternate keystrokes: The cursor will be moved to the current position in the nextwindow up the screen. If the cursor is already in thetopmost window, it will move to the bottom window. If thereis only one window, nothing will happen. TOGGLE SNOW CONTROL Keystroke sequence:  Alternate keystrokes: (None)When Snow Control is ON, the Editor avoids the screeninterference patterns called "snow" that are produced bycertain display adapters, notably the IBM Color GraphicsAdapter. For other color adapters, the Snow Control can beturned off. This improves screen updating performanceconsiderably. TOGGLE BLOCK CURSOR Keystroke sequence: (None) Alternate keystrokes: (None)The Editor offers a choice between a blinking hardwarecursor and a solid unblinking cursor. The color of the blockcursor can be set via the Options Colors menu. TOGGLE 43 LINE MODE Keystroke sequence: (None) Alternate keystrokes: (None)On computers equipped with an Enhanced Graphics Adapter, theEditor can display 43 lines on the screen. Toggle thisoption ON if a longer text display is desired. TOGGLE TAB WRITING Keystroke sequence: (None) Alternate keystrokes: (None)By default, the Editor writes tab characters in files savedfrom the editor. If Tab Writing is activated, the Editorwill translate sequences of spaces to tabs in order to savedisk space for the output file. Tabs are computed using thefixed spacing currently set for fixed tabs. Multiple spacesfound within pairs of single or double quotes (as used inPascal or C source code) will not be converted to tabs.Tab writing is saved as an Editor default.  TOGGLE INITIAL ZOOM STATE Keystroke sequence: (None) Alternate keystrokes: (None)The state of this toggle determines the Editor's defaultbehavior when more than one window is on the screen. WhenInitial Zoom State is OFF, multiple windows will appearsimultaneously on the screen, that is, they will not bezoomed.When Initial Zoom State is ON, multiple windows will bezoomed. The last file opened will be visible on the screen,and others will be hidden behind it. Initial Zoom State is saved as an Editor default.The normal zoom window command may be used at any time,regardless of Initial Zoom State. HELP SUMMARYThe Editor provides help in several ways. This sectiondescribes how to use the help system.Whenever the Editor help system is on screen, you can usethe  and  keys to move from one screen toanother.  and  will take you to the first andlast pages of the section. Press  when you are doneusing help. The Editor menu system is available at any time by pressing. Most of the Editor's commands may be selected fromthe menus. Within the menu system, you may activate "Keyhelp" by choosing Setup Display options Key help. With Keyhelp activated, the quick keystrokes that activate eachcommand will be displayed on the top row of the screen whilethe selection bar is positioned over that menu item.Pressing  while within the Editor's menu system orwithin any prompt box will bring up a window containing moredetailed help regarding the selected command. Pressing while you are entering text will bring up a menu ofhelp topics. HELP SUMMARYThe Editor provides help in several ways. This help sectiondescribes how to use the help system.Whenever the Editor help system is on screen, you can usethe  and  keys to move from one screen toanother.  and  will take you to the first andlast pages of the section. Press  when you are doneusing help. The Editor menu system is available at any time by pressing. Most of the Editor's commands may be selected fromthe menus. Within the menu system, you may activate "Keyhelp" by choosing Setup Display options Key help. With Keyhelp activated, the quick keystrokes that activate eachcommand will be displayed on the top row of the screen whilethe selection bar is positioned over that menu item.Pressing  while within the Editor menu system orwithin any prompt box will bring up a window containing moredetailed help regarding the selected command. Pressing while you are entering text will bring up a menu ofhelp topics.  Help and Status KeystrokesShow help menu Main:  Alternate: (None)Show help summary Main:  Alternate: (None)Activate menu system Main:  Alternate: Show system and file information Main:  Alternate: (None)Show available memory Main:  Alternate: (None) Cursor MovementCharacter left Main:  Alternate: Character right Main:  Alternate: Word left Main:  Alternate: Word right Main:  Alternate: Line up Main:  Alternate: Line down Main:  Alternate:  Scroll up Main:  Alternate: (None)Scroll down Main:  Alternate: (None)Page up Main:  Alternate: Page down Main:  Alternate: Top of file Main:  Alternate: Bottom of file Main:  Alternate: Beginning of line Main:  Alternate: End of line Main:  Alternate: Top of screen Main:  Alternate: Bottom of screen Main:  Alternate:  Quick Movement CommandsGo to line Main:  Alternate: Go to column Main:  Alternate: Go to window Main:  Alternate: (None)Previous cursor position Main:  Alternate: (None)Up to equal indent Main:  Alternate: (None)Down to equal indent Main:  Alternate: (None)  Text MarkersSet a marker by menu Main: (None) Alternate: (None)Jump to marker by menu Main: (None) Alternate: (None)Toggle marker display Main:  Alternate: (None)Set marker 0 Main: 0 Alternate: (None)Set marker 1 Main: 1 Alternate: (None)Set marker 2 Main: 2 Alternate: (None) Set marker 3 Main: 3 Alternate: (None)Set marker 4 Main: 4 Alternate: (None)Set marker 5 Main: 5 Alternate: (None)Set marker 6 Main: 6 Alternate: (None)Set marker 7 Main: 7 Alternate: (None)Set marker 8 Main: 8 Alternate: (None)Set marker 9 Main: 9 Alternate: (None)Jump marker 0 Main: 0 Alternate: (None)Jump marker 1 Main: 1 Alternate: (None)Jump marker 2 Main: 2 Alternate: (None)Jump marker 3 Main: 3 Alternate: (None)Jump marker 4 Main: 4 Alternate: (None)Jump marker 5 Main: 5 Alternate: (None)Jump marker 6 Main: 6 Alternate: (None)Jump marker 7 Main: 7 Alternate: (None) Jump marker 8 Main: 8 Alternate: (None)Jump marker 9 Main: 9 Alternate: (None) Text Insertion and DeletionUndo last deletion Main:  Alternate: (None)Restore line Main:  Alternate: (None)Insert undo buffer Main:  Alternate: (None)Tab Main:  Alternate: (None)Backward Tab Main:  Alternate: (None)New line Main:  Alternate: (None) Insert line Main:  Alternate: (None)Insert control character Main:  Alternate: (None)Delete current character Main:  Alternate: Delete character left Main:  Alternate: Delete word Main:  Alternate: (None)Delete to end of line Main:  Alternate: (None)Delete line Main:  Alternate: (None)Delete line (no undo) Main:  Alternate: (None)Abort command (1 char) Main:  Alternate:  Search and ReplaceSearch for pattern Main:  Alternate: Search and replace Main:  Alternate: Search and playback macro Main:  Alternate: (None)Search again Main:  Alternate:  FilesEdit another file Main:  Alternate: (None)Abandon file Main:  Alternate: (None)Open file Main:  Alternate: (None)Save and continue edit Main:  Alternate: Save and exit to DOS Main:  Alternate: (None)Write to named file Main:  Alternate: (None) Save and Switch files Main:  Alternate: (None) WindowsOpen Window Main:  Alternate: Close window Main:  Alternate: (None)Resize window Main:  Alternate: Next window Main:  Alternate: Previous window Main:  Alternate: Zoom window Main:  Alternate:   Block CommandsBegin block Main:  Alternate: End block Main:  Alternate: Start of block Main:  Alternate: (None)End of block Main:  Alternate: (None)Copy block Main:  Alternate: Move block Main:  Alternate:  Delete block Main:  Alternate: (None)Hide block Main:  Alternate: (None)Mark current word Main:  Alternate: (None)Write block to file Main:  Alternate: (None) Text FormattingToggle case Main:  Alternate: (None)Lower case Main:  Alternate: (None)Upper case Main:  Alternate: (None) TabsTab Main:  Alternate: (None)Backward Tab Main:  Alternate: (None)Set tab size Main: (None) Alternate: (None) Utility CommandsChange active directory Main:  Alternate: (None)Directory Main: (None) Alternate: (None)Exit to Operating system Main:  Alternate: (None) Settings and TogglesToggle insert mode Main:  Alternate: Toggle autoindent mode Main:  Alternate: (None)Toggle fixed tabs Main:  Alternate: (None)Toggle high-bit strip Main: (None) Alternate: (None)Toggle tab expansion Main: (None) Alternate: (None)Toggle tab writing Main: (None) Alternate: (None) Toggle key help Main:  Alternate: (None)Toggle snow check Main:  Alternate: (None)Toggle block cursor Main: (None) Alternate: (None)Toggle 43 line mode Main: (None) Alternate: (None)Set undo limit Main: (None) Alternate: (None)Set default file extension Main: (None) Alternate: (None)Set colors Main: (None) Alternate: (None)Set home directory Main: (None) Alternate: (None)Save setup Main: (None) Alternate: (None) MacrosLoad macros from disk Main: (None) Alternate: (None)Store macros to disk Main: (None) Alternate: (None)Record macro Main:  Alternate: Edit macro Main: (None) Alternate: (None)Playback macro by menu Main: (None) Alternate: (None)Playback Macro 1 Main:  Alternate: (None) Playback Macro 2 Main:  Alternate: (None)Playback Macro 3 Main:  Alternate: (None)Playback Macro 4 Main:  Alternate: (None)Playback Macro 5 Main:  Alternate: (None)Playback Macro 6 Main:  Alternate: (None)Playback Macro 7 Main:  Alternate: (None)Playback Macro 8 Main:  Alternate: (None)Playback Macro 9 Main:  Alternate: (None)Playback scrap macro Main:  Alternate: (None)Playback scrap macro 1 time Main: 1 Alternate: (None)Playback scrap macro 2 times Main: 2 Alternate: (None)Playback scrap macro 3 times Main: 3 Alternate: (None)Playback scrap macro 4 times Main: 4 Alternate: (None)Playback scrap macro 5 times Main: 5 Alternate: (None)Playback scrap macro 6 times Main: 6 Alternate: (None) Playback scrap macro 7 times Main: 7 Alternate: (None)Playback scrap macro 8 times Main: 8 Alternate: (None)Playback scrap macro 9 times Main: 9 Alternate: (None) Function Keys Help menu Save and continue edit Edit another file Add window Zoom current window Next window Begin block End block Find pattern Find next Go to line Go to column  Toggle macro record Close window Resize current window Previous window Copy block Move block Find and replace Block Column Mode Toggle